Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4530
#4534

Fitted Dress With Sleeves And Bow

Pattern #4531

A women's knee-length dress with a fitted princess-line bodice, a seam at hip level and a skirt with inverted pleats. Short raglan sleeves, a wide neckline band edged in contrast bias binding, a bound back keyhole with two buttons and loops, and a bow at the front neckline. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres.

Tech. Description

Fitted Dress With Sleeves And Bow

A women's knee-length dress with a fitted princess-line bodice, a seam at hip level and a skirt with inverted pleats. Short raglan sleeves, a wide neckline band edged in contrast bias binding, a bound back keyhole with two buttons and loops, and a bow at the front neckline.

When To Wear

  • For daytime and office wear in spring and summer.
  • Recommended: wear with a narrow decorative belt in the colour of the binding.
  • For family celebrations.

Key Design Features

Silhouette: Fitted bodice shaped by princess seams on the front and back; the skirt flares from a seam at hip level.

Length: Knee length.

Neckline: Wide round neckline with a double-layer band (outer and inner facings), edged with folded contrast bias binding set into the seam.

Sleeves: Short raglan sleeves, each cut as a front and a back part joined by a seam over the shoulder.

Front: Two small pleats on the centre front panel below the neckline band, turned away from the centre; a bow with bias-bound edges is held by a narrow bridge sewn to the left side of the front neckline band.

Back: Centre back seam; a V-shaped keyhole at the neckline bound with a bias strip, closed with two buttons and rouleau loops set into the band.

Skirt: Lower front and back each cut on the fold, with inverted pleats, joined to the bodice at hip level.

Closure: Zipper in the side seam.

Finishing: Seams overlocked; dress and sleeve hems turned up and topstitched.

Level Of Difficulty

Intermediate. Raglan sleeves, a bound neckline band, a bias-bound keyhole with rouleau loops, inverted pleats and a side zipper.

Fabric Recommendations

Dress fabrics made from natural or blended fibres.

Additional Supplies

  • Fusible interfacing (neckline facings)
  • Zipper
  • 2 buttons
  • Contrast bias tape (for the neckline band, bow and bridge)

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: hem allowance for the garment and sleeve hem – 1.5 cm, allowance for the bridge and bow edges – 0 cm, other allowances - 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need.

From main fabric:

  • Center back – 2 pieces
  • Side back - 2 pieces
  • Center front – 1 piece
  • Side front – 2 pieces
  • Lower back – 1 piece on fold
  • Lower front – 1 piece on fold
  • Back sleeve – 2 pieces
  • Front sleeve – 2 pieces
  • Back neckline facing – 4 pieces
  • Front neckline facing – 2 pieces
  • Bow – 1 piece
  • Bridge – 1 piece

From fusible interfacing:

  • Back neckline facing – 2 pieces
  • Front neckline facing – 1 piece

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Fuse interfacing to the back and front neckline facings.
  2. Stitch the back princess seams, press allowances towards the center and overlock. Stitch the front princess seams, press allowances towards the center and overlock. Form and secure pleats on the center front (pleat depths directed away from the center).
  3. Attach the back sleeve to the back, press allowances towards the sleeve, overlock. Attach the front sleeve to the front, press allowances towards the sleeve, overlock. Stitch the upper sleeve seams, press allowances towards the back and overlock.
  4. Press open the ready-made bias tape, then press it in half lengthwise, right side out, and baste it to the neckline edge so that the tape extends 1 cm beyond the marked facing attachment line.
  5. Cut a bias strip 4 cm wide and a length equal to the back opening length + 4 cm. Fold the bias strip in half lengthwise, right side out, and press. Place the bias strip with the opening edge right sides together, extending the ends, and stitch. Fold the bias strip to the wrong side, clip allowances, and topstitch along the fold to the main piece. Press the seam.
  6. Stitch the center back seam, press allowances to the left side and overlock.
  7. Cut a bias strip 2.5 cm wide and 10 cm long. Fold the strip in half lengthwise, right side in, and stitch 0.3 cm from the fold. Trim allowances close to the stitching, turn the strip right side out and straighten the rouleau. Cut loops. The length of one loop is approximately 4 cm.
  8. Stitch the shoulder seams of the outer and inner neckline facings, press allowances open. Place facings right sides together and stitch the neckline edge and ends up to the mark, inserting loops on the right side. Clip allowances at curves, turn facing right side out, press. Attach the outer facing to the neckline edge, press allowances towards the facing. Press the lower edge of the inner facing to the wrong side and topstitch in the seam of the outer facing attachment.
  9. On the lower pieces, form and secure inverted pleats. Attach the lower pieces to the back and front, press allowances upwards and overlock.
  10. Stitch the right side seam simultaneously with the lower sleeve seam, press allowances towards the back and overlock. Overlock the left side edges separately on each piece, stitch the left side seam from the top to the mark and from the lower piece attachment seam to the bottom. Press allowances open, insert the zipper.
  11. Overlock the bottom edge of the dress and the sleeve hem, press to the wrong side and topstitch.
  12. Bind the long edges of the bow and bridge with bias tape, overlock the short sides. Attach the bridge to the front neckline facing on the left side. Fold the bow, insert it into the bridge, and secure. Tip: The dress is recommended to be worn with a decorative belt in the color of the binding.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?