Tailored Jacket with Mock Double Welt Pockets
A women's fitted, fully lined jacket at hip length, with a wide open neckline edged by cut-on revers, a single-breasted button front, elbow-length two-piece sleeves and mock double-welt pockets. Worn with a belt.
When To Wear
- Over a dress or with a pencil skirt for the office, belted at the waist.
- In spring and autumn over a thin top or blouse.
Key Design Features
Silhouette: Fitted through the waist by princess seams and darts at front and back.
Length: Hip length, with rounded lower front corners.
Neckline: Wide and low, faced and turned back into revers; there is no separate collar piece.
Front: Centre front and side front panels with a front dart running down to the hemline. Single-breasted, closed with buttons.
Sleeves: Elbow-length two-piece set-in sleeves with an eased cap and shoulder pads.
Pockets: Mock double-welt pockets: an upper welt on the centre front and a lower welt on the side front, backed by an underlay, with no pocket bag.
Back: Centre back seam, princess seams and back darts.
Lining: Full lining attached to the front facings and back neck facing; the jacket is turned through an opening in the left sleeve lining.
Level Of Difficulty
Intermediate. Princess seams, two-piece set-in sleeves, mock welts, a bagged lining and faced revers.
Fabric Recommendations
Suiting fabrics of natural or blended fibres.
Additional Supplies
- Lining fabric
- Fusible interfacing (centre fronts, welts, front facings, back neck facing, sleeve hems)
- 4 buttons
- Shoulder pads
- Decorative belt to wear at the waist
Cutter's Must
From main fabric:
- 1. Center Back – 2 pieces
- 2. Side Back – 2 pieces
- 3. Center Front — 2 pieces
- 5. Side Front — 2 pieces
- 6. Upper Sleeve – 2 pieces
- 7. Lower Sleeve – 2 pieces
- 8. Back Neck Facing – 1 piece
- 9. Center Front Facing – 2 pieces
- 10. Pocket Underlay - 2 pieces
- 11. Upper Welt -2 pieces
- 12. Lower Welt — 2 pieces
From lining fabric:
- 1. Center Back – 2 pieces
- 2. Side Back – 2 pieces
- 3. Side Front – 2 pieces
- 4. Upper Sleeve – 2 pieces
- 5. Lower Sleeve – 2 pieces
- The sleeve lining pieces, as well as the lining pieces for the center and side back, are cut according to the main fabric patterns, subtracting the width of the back neck facing.
- From fusible interfacing: center front, upper and lower welts, center front facing, back neck facing, sleeve hem.
Sewing Instructions
- Fuse fusible interfacing to the designated pieces.
- On the back, stitch the dart. Press the dart depth towards the center. Stitch the princess seam. Press seam allowances open. Stitch the center back seam. Press seam allowances open.
- Fold the pocket welts in half lengthwise and press. Place the welts onto the front pieces: the upper welt onto the front, the lower welt onto the side front, and stitch. Turn, smooth, and press the welts. Place the underlay on the wrong side and stitch into the welt attachment seams.
- Press the hem allowance on the side front. Stitch the front dart. The seam should end exactly at the hemline. Trim the dart depth to 1 cm, press the seam open.
- Stitch the side and shoulder seams of the jacket. Clip the shoulder seams, press the seams open.
- Stitch the elbow seam of the sleeve. Press the seam allowance open. Stitch the front seam of the sleeve. Set the sleeves into the armholes, easing the sleeve cap. Attach shoulder pads.
- Stitch the shoulder seams of the center front facings and back neck facing. Clip and press seam allowances open. On the lining fabric pieces, stitch the seams, leaving an opening in the left elbow seam. Set in the sleeves.
- Place the center front facing on the right side of the front, right side down, and stitch along the front edge, simultaneously stitching the neckline. Start and end the stitching exactly at the marked hemline. Clip seam allowances at curves, turn the pieces right side out, and press.
- Stitch the lining to the center front facings and back neck facing. Stitch the lining to the sleeve hem. Turn the jacket right side out through the technological opening. Close the opening.
- Work buttonholes and sew on buttons. The jacket is recommended to be worn with a decorative belt.