Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4306
#4308

Gathered Yoke Blouse

Pattern #4307

A women's hip-length pull-on blouse with a round neckline, front and back yokes with gathers below, and long sleeves gathered into buttoned cuffs. Worn with a tie belt at the waist. Drafted to your own measurements. Recommended fabric: thin silk fabrics of natural or blended fibres.

Tech. Description

Gathered Yoke Blouse

A women's hip-length pull-on blouse with a round neckline, front and back yokes with gathers below, and long sleeves gathered into buttoned cuffs. Worn with a tie belt at the waist.

When To Wear

  • For work and daytime wear with trousers or a straight skirt, belted at the waist.
  • In spring and summer in light silk; under a jacket in cooler months.

Key Design Features

Silhouette: Loose body gathered into the yokes, drawn in at the waist by a belt.

Length: Hip length, straight hem.

Neckline: Round, finished by the double-layer yokes: the outer and inner yokes are stitched together along the neckline and turned, with no facing.

Front: No opening. The front is cut in one piece on the fold, gathered between notches into the front yoke.

Back: Cut in one piece on the fold, gathered into the back yoke.

Sleeves: Long, one-piece set-in sleeves, gathered at the wrist. The sleeve slit is bound with a self-fabric bias strip.

Cuffs: Interfaced, with an extension, fastened with buttons.

Finishing: Yoke seams pressed up; hem turned twice and topstitched.

Level Of Difficulty

Beginner. Gathering into yokes, a bound sleeve slit and buttoned cuffs are the only detailed steps.

Fabric Recommendations

Thin silk fabrics of natural or blended fibres.

Additional Supplies

  • Fusible interfacing (cuffs)
  • 4 buttons
  • Belt or tie to wear at the waist

Cutter's Must

From main fabric:

  • Back Yoke – 2 pieces
  • Front Yoke – 2 pieces
  • Back Skirt Half — 1 piece on fold
  • Front Skirt Half — 1 piece on fold
  • Sleeve — 2 pieces
  • Cuff — 2 pieces

From fusible interfacing:

  • Cuff - 2 pieces

Sewing Instructions

  1. Reinforce the cuffs with fusible interfacing.
  2. Stitch the shoulder seams on the outer and inner yokes. Press seam allowances open. Fold the yokes right sides together and stitch the neckline. Clip seam allowances, turn pieces right side out, and press. Then treat the yokes as single-layer pieces.
  3. Along the upper edge of the front skirt half, between the notches, stitch with a loosely tensioned thread and gather. Attach the front skirt half to the front yoke. Overlock seam allowances and press upwards.
  4. Along the upper edge of the back skirt half, between the notches, stitch with a loosely tensioned thread and gather. Attach the back skirt half to the back yoke. Overlock seam allowances and press upwards.
  5. Make a slit on the sleeve along the marked line. Cut a bias binding from the main fabric, 4 cm wide and with a length equal to twice the slit length + 4 cm. Fold the bias binding in half lengthwise and press. Press the outer seam allowances towards the center. Finish the sleeve slit with the bias binding.
  6. Set the sleeve into the open armhole. Overlock the seam allowance and press towards the sleeve.
  7. Stitch the side seam simultaneously with the sleeve seam. Overlock the seam allowance and press towards the back.
  8. Along the lower edge of the sleeve, stitch with a loosely tensioned thread and gather.
  9. Fold the cuff in half, right sides together, and stitch the short sides and the step. Begin stitching strictly at the marked line for attaching the cuff to the sleeve. At the notch, clip the seam allowances, turn the cuff right side out, and press. Attach the outer side of the cuff to the bottom of the sleeve. Turn under the inner side of the cuff and topstitch into the attaching seam.
  10. Fold the bottom edge of the garment twice to the wrong side, press, and topstitch.
  11. Make buttonholes on the cuffs. Sew on buttons. The blouse is recommended to be worn with a belt.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?