CUTTER'S MUST
- From main fabric:
- 1. Lower SLEEVE – QTY 2
- 2. BACK PANEL – QTY 2
- 3. SIDE PANEL – QTY 2
- 4. Center FRONT PANEL – QTY 2
- 5. Central FRONT PANEL – QTY 2
- 6. Upper FRONT PANEL – QTY 2
- 7. FACING – QTY 2
- FROM FUSIBLE INTERFACING: FACING.
Sewing Instructions
- Reinforce the FACING with FUSIBLE INTERFACING.
- Stitch the center FRONT PANEL to the central FRONT PANEL. Overcast the SEAM ALLOWANCES and press towards the central FRONT PANEL.
- Along the lower edge of the upper FRONT PANEL, stitch at 0.5 cm from the edge with loosely tensioned stitches. Gather the upper edge of the piece to match the length of the center and central FRONT PANEL edges, distributing the gathers evenly along the entire length.
- Stitch the upper FRONT PANEL to the central and center FRONT PANEL. Overcast the SEAM ALLOWANCES and press towards the central and center FRONT PANEL. Topstitch at 0.5 cm from the seam.
- Stitch and overcast the center BACK PANEL seam. Press the center BACK PANEL seam. Stitch and overcast the princess seams on the FRONT PANEL and BACK PANEL. Press the BACK PANEL princess seams towards the center of the BACK PANEL, and the FRONT PANEL princess seams towards the center of the FRONT PANEL.
- Overcast the outer edge of the FACING. Place the FACING and FRONT PANEL right sides together, pin, and stitch the FRONT PANEL edge upwards. Trim the SEAM ALLOWANCES at the corners of the central FRONT PANEL. Remove pins. Turn the FACING to the wrong side, baste, and press. Remove temporary stitching.
- Stitch the shoulder seams, clip the SEAM ALLOWANCES at the corner. Overcast the shoulder seams and press towards the BACK PANEL. Form pleats along the upper SLEEVE seam (according to the technical drawing).
- Fold the one-piece COLLAR pieces right sides together and stitch. Press the seam open. Stitch the lower COLLAR into the neckline. Topstitch the upper COLLAR into the seam of the lower COLLAR attachment.
- Stitch the lower SLEEVE to the SLEEVE edges of the FRONT PANEL and BACK PANEL. Overcast the SEAM ALLOWANCES and press. Set the SLEEVES into the lower armhole. Clip the SEAM ALLOWANCES at the corners and overcast the seam.
- Overcast the lower edge of the SLEEVE and blouse, turn to the wrong side and topstitch.
