Short Sleeve Princess Seam Blouse-Jacket

CUTTER'S MUST

• STRAP - QTY 2
• COLLAR - QTY 2
• BACK PANEL CENTER - QTY 2
• BACK PANEL SIDE - QTY 2
• FRONT PANEL SIDE - QTY 2
• BACK NECK FACING - QTY 1 on fold
• FRONT PANEL CENTER - QTY 2
• FRONT FACING - QTY 2
• SLEEVE - QTY 2
• FUSIBLE INTERFACING: Reinforce front facings and back neck facing with fusible interfacing:
• FUSIBLE INTERFACING BACK NECK FACING - QTY 1 on fold
• FUSIBLE INTERFACING FRONT FACING - QTY 2

Sewing Instructions

1. Stitch the strap cleanly along the long sides, turn right side out, and press. Topstitch at a distance of 0.5 cm.
2. Sew the center back seam and the back princess seams - insert the strap into the princess seams.
3. Stitch the front princess seams.
4. Stitch the shoulder and side seams.
5. Place the front facings right sides together with the front panels and pin to the front edges, then stitch the front edges with the front facings. Stitch the shoulder seams of the front facing and the back neck facing.
6. Stitch the collar cleanly along the outer contour. Attach the undercollar to the blouse neckline, attach the upper collar to the facing neckline. Press seam allowances open. Stitch the pressed seam allowances of the undercollar attachment and the back neck facing from the inside.
7. Hem the jacket. Attach the front facings to the bottom hem.
8. Topstitch the blouse along the front edges and collar at a distance of 0.5 cm.
9. Sew the sleeve seams. Hem the sleeves and set them into the blouse armholes, easing the sleeve cap.
10. On the right FRONT PANEL, make buttonholes; on the left, sew on buttons.
11. Sew on shoulder pads.