Color-Block Faux Leather Coat

CUTTER'S MUST

• From main fabric:
• 1. Back Yoke – 2 QTY
• 2. Back Middle Panel – 2 QTY
• 3. Back Lower Panel – 2 QTY
• 4. Back Contrast Insert – 2 QTY
• 5. Back Lower Side Panel – 2 QTY
• 6. Back Upper Side Panel – 2 QTY
• 7. Front Yoke – 2 QTY
• 8. Front Middle Panel – 2 QTY
• 9. Front Lower Panel – 2 QTY
• 10. Front Upper Side Panel – 2 QTY
• 11. Front Lower Side Panel – 2 QTY
• 12. Front Contrast Insert – 2 QTY
• 13. Collar Stand – 2 QTY
• 14. FACING – 2 QTY
• 15. SLEEVE – 2 QTY
• 16. Back SLEEVE Insert – 2 QTY
• 17. Front SLEEVE Insert – 2 QTY

TIP: The front contrast insert and back contrast insert can be cut into additional pieces, if desired, depending on the size of the material used.

Fabric & Materials

FROM FUSIBLE INTERFACING: FACING, Collar Stand, Back Yoke, Front Yoke; hem SEAM ALLOWANCES: SLEEVE, front contrast insert, back contrast insert.

Sewing Instructions

1. Fuse FUSIBLE INTERFACING to the FACING, Collar Stand, Back Yoke, Front Yoke, SLEEVE hem, front contrast insert hem, and back contrast insert hem.
2. Place the upper Collar Stand and lower Collar Stand right sides together and stitch along the outer edge.
3. Attach the Front Yoke to the front contrast insert. Stitch a topstitch 0.2 cm from the seam of the Front Yoke attachment.
4. Attach the Front Middle Panel to the front contrast insert. Stitch a topstitch 0.2 cm from the seam of the Front Middle Panel attachment.
5. Attach the Front Lower Panel to the front contrast insert. Stitch a topstitch 0.2 cm from the seam of the Front Lower Panel attachment.
6. Attach the Front Upper Side Panel to the front contrast insert. Stitch a topstitch 0.2 cm from the seam of the Front Upper Side Panel attachment.
7. Attach the Front Lower Side Panel to the front contrast insert. Stitch a topstitch 0.2 cm from the seam of the Front Lower Side Panel attachment.
8. Attach the Back Yoke to the back contrast insert. Stitch a topstitch 0.2 cm from the seam of the Back Yoke attachment.
9. Attach the Back Upper Side Panel to the back contrast insert. Stitch a topstitch 0.2 cm from the seam of the Back Upper Side Panel attachment.
10. Attach the Back Middle Panel to the back contrast insert. Stitch a topstitch 0.2 cm from the seam of the Back Yoke attachment.
11. Attach the Back Lower Panel to the back contrast insert. Stitch a topstitch 0.2 cm from the seam of the Back Lower Panel attachment.
12. Attach the Back Lower Side Panel to the back contrast insert. Stitch a topstitch 0.2 cm from the seam of the Back Lower Side Panel attachment.
13. Stitch the shoulder and side seams.
14. Attach the lower Collar Stand to the neckline of the coat.
15. Place the FRONT PANELS right sides together and align the edges, matching the yokes, and measure the length of the front edges. Attach the ZIPPER to the edge of the front opening. Fold the edges of the front opening in the ZIPPER area and press through a pressing cloth.
16. Attach the upper Collar Stand to the FACING.
17. Place the FACING on the right side of the FRONT PANEL, face down. Stitch the ends of the Collar Stand and the front opening. Stitching is done from the FRONT PANEL side. Attach the lower edges of the FACINGS to the FRONT PANEL strictly along the marked hemline. Trim the seams of the upper and lower corners of the front opening. Turn the front openings to the right side, straighten the seams. Stitch a topstitch 0.5 cm from the edge.
18. Attach the back SLEEVE insert to the SLEEVE. Stitch a topstitch 0.2 cm from the seam of the back SLEEVE insert attachment.
19. Attach the front SLEEVE insert to the SLEEVE. Stitch a topstitch 0.2 cm from the seam of the front SLEEVE insert attachment.
20. Stitch the SLEEVE seam. Set the SLEEVES into the armholes according to the NOTCHES.
21. Attach the shoulder pads and SLEEVE head rolls.
22. On the cut LINING pieces, stitch the seams, leaving an opening in the SLEEVE seam. Set the SLEEVES and press the LINING.
23. Attach the LINING to the inner edges of the FACINGS and the upper Collar Stand. Press open the SEAM ALLOWANCES of the Collar Stand attachment seams and secure them close to the seams. Attach the SLEEVE LINING hem and the garment hem to the SLEEVE hem and the coat hem.