Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5273
#5275

Hooded Zipper Jacket with Pockets

Pattern #5274

A short, fitted women's jacket with a lined hood, a separating front zipper and a front cut into a chest yoke, centre and side panels and a lower panel with in-seam pockets. Fully lined, including the hood. Drafted to your own measurements. Recommended fabric: rainwear fabrics in polyester, cotton or blends; lining fabric for the inside.

Tech. Description

Hooded Zipper Jacket with Pockets

A short, fitted women's jacket with a lined hood, a separating front zipper and a front cut into a chest yoke, centre and side panels and a lower panel with in-seam pockets. Fully lined, including the hood.

When To Wear

  • As a light outer layer in spring and autumn, with jeans, trousers or a knit dress.
  • For walks and travel in rainwear fabric, with the hood up in wind or drizzle.

Key Design Features

Silhouette: Fitted to the waist through vertical panel seams on the front and curved seams on the back.

Length: Short, ending at the high hip.

Front: A yoke across the chest, a centre front panel and a side front panel, and a lower front panel below the waist seam; the yoke and panel seams are topstitched.

Closure: Separating zipper at the centre front, set between the front edge and the front facing.

Collar: Two-piece hood with a centre seam, lined, with a separate hood facing topstitched along the front edge.

Sleeves: Two-piece set-in sleeves (upper and under sleeve).

Pockets: In-seam pockets in the seam between the side front and the lower front panel, with topstitched openings and bar tacks at the ends.

Back: Centre back seam and side back panels.

Lining: Full lining shaped with darts, with front facings and a back neck facing; hem and sleeve hems are joined to the lining.

Level Of Difficulty

Intermediate. Many panel seams to match and topstitch, in-seam pockets, a lined hood, a separating zipper set with the facing, and a full bagged lining turned through a sleeve seam.

Fabric Recommendations

Rainwear fabrics in polyester, cotton or blends; lining fabric for the inside.

Additional Supplies

  • Lining fabric
  • Fusible interfacing
  • 1 separating zipper, length to match the front

Cutter's Must

Main fabric:

  • Center Front – 2 pieces
  • Side Front – 2 pieces
  • Center Back – 2 pieces
  • Side Back – 2 pieces
  • Front Yoke – 2 pieces
  • Front Pocket – 2 pieces
  • Upper Sleeve – 2 pieces
  • Lower Sleeve – 2 pieces
  • Hood – 2 pieces
  • Back Neckline Facing – 1 piece
  • Hood Facing – 2 pieces
  • Center Front Facing – 2 pieces

Lining:

  • Front – 2 pieces
  • Back – 2 pieces
  • Upper Sleeve – 2 pieces
  • Lower Sleeve – 2 pieces
  • Hood – 2 pieces
  • Pocket Lining – 4 pieces

Sewing Instructions

  1. In-seam pockets. Stitch the pocket linings to the pocket opening edges of the side front and the front pocket. Clip the seam allowance and press the pocket linings away from the opening. Topstitch along the pocket opening.
  2. Outer jacket. Stitch the front pocket to the center front and topstitch the seam. Stitch the side front to the center front and topstitch. Stitch the pocket linings together. Bar-tack the ends of the pocket opening. Stitch the front yoke to the front and topstitch the seam. Stitch the side back to the center back. Stitch the shoulder seams. Stitch the side seams. Stitch the upper sleeves to the lower sleeves. Set the sleeves into the armholes. Stitch the hood seams. Stitch the seams of the lining hood. Stitch the hood facing pieces together and stitch the hood facing to the lining hood. Stitch the hood and the lining hood together along the front edge and turn. Topstitch the hood facing onto the hood. Stitch the hood into the neckline.
  3. Lining. Stitch the darts on the lining pieces. Stitch the center front facings to the lining fronts. Stitch the back neckline facing to the lining back. Stitch the lining pieces together, leaving an opening for turning in the seam of one sleeve.
  4. Zip closure. Place the zip on the front edge of the jacket right sides together (teeth pointing away from the edge). Stitch the center front facings to the front edges, catching the zip in the same seam. Stitch the lining to the jacket around the neckline.
  5. Press up the hem and sleeve hem allowances. Stitch the jacket hem and the sleeve hems to the lining.
  6. Close the turning opening.
  7. Press the finished jacket.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?