Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5274
#5276

Hooded Full-Zip Jacket

Pattern #5275

A women's hip-length jacket in knit fabric with a three-piece hood on an elastic drawcord, a separating front zipper and slanted welt pockets set into the seam between the front and the side panel. Unlined, with front and neck facings. Drafted to your own measurements. Recommended fabric: knit fabric with a brushed or terry back: sweatshirt jersey, knit-backed velvet (velour).

Tech. Description

Hooded Full-Zip Jacket

A women's hip-length jacket in knit fabric with a three-piece hood on an elastic drawcord, a separating front zipper and slanted welt pockets set into the seam between the front and the side panel. Unlined, with front and neck facings.

When To Wear

  • As a warm top layer at home, for walks and for sport in spring and autumn.
  • With jeans, joggers or leggings, over a T-shirt or thin knit.

Key Design Features

Silhouette: Relaxed, straight body.

Length: To the hip.

Collar: Hood made of two side pieces and a centre panel. The front edge is turned and topstitched to form a channel for an elastic cord, which exits through two buttonholes and ends in cord end tips.

Front: Separating zipper at the centre front, set between the front edge and the facing; the facing also finishes the neckline and is stitched down at the shoulder seam.

Sleeves: One-piece set-in sleeves with a low shoulder line, hems topstitched.

Pockets: Pocket bags with an interfaced folded welt, placed on the side panels and caught in the seam joining the side panel to the front; the seam is topstitched.

Back: One piece, with side panels at the sides.

Finishing: Seams sewn with a narrow zigzag or stretch stitch; hem and sleeve hems overlocked and topstitched with a twin needle so they stay elastic.

Level Of Difficulty

Intermediate. Sewing knit fabric with stretch stitches, a separating zipper with a facing, welt pockets inserted into a panel seam and a drawcord hood.

Fabric Recommendations

Knit fabric with a brushed or terry back: sweatshirt jersey, knit-backed velvet (velour).

Additional Supplies

  • Fusible interfacing (pocket welts)
  • 1 separating zipper, length to match the front
  • Elastic cord for the hood
  • 2 cord end tips

Cutter's Must

Main fabric:

  • Front – 2 pieces
  • Back – 1 piece
  • Sleeve – 2 pieces
  • Side Part – 2 pieces
  • Hood – 2 pieces
  • Center Hood – 1 piece
  • Center Front Facing – 2 pieces
  • Pocket Bag – 4 pieces
  • Off-Set Welt – 2 pieces

Tip: To keep the seams stretchy, stitch the pieces with a narrow zigzag or a special stretch stitch. To keep the hem stretchy, overlock the hem allowance, then stitch it with a twin needle. The same applies to any other edges of the garment that should keep their elasticity. These recommendations do not apply to industrial production.

Sewing Instructions

  1. Patch pocket with welt. Fuse interfacing to the off-set welt, fold it in half lengthwise and press. Place two pocket bags right sides together, insert the off-set welt between them and stitch along the pocket opening edge. Turn the pocket bags right side out and press.
  2. Assembly. Place each finished pocket on the side part following the markings. Stitch the side part to the front, catching the pocket with its welt in the seam. Topstitch the seam. Stitch the shoulder seams. Stitch the side seams. Stitch the sleeve seams. Set the sleeves into the armholes. Stitch the hood pieces to the center hood. Make the buttonholes on the hood at the markings. Turn under the allowance along the front edge of the hood and topstitch. Stitch the hood into the neckline.
  3. Zip closure. Place the zip on the front edge of the jacket right sides together (teeth pointing away from the edge). Stitch the center front facings to the front edges, catching the zip in the same seam. Face the neckline with the center front facings and stitch them down onto the shoulder seams.
  4. Press up the hem and sleeve hem allowances. Topstitch the hem of the jacket and the sleeve hems.
  5. Press the finished jacket.
  6. Thread the cord through the hood channel.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?