Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5275
#5277

Insulated Zip-Front Jacket with Shirt Collar and Zipper Pockets

Pattern #5276

A women's hip-length insulated jacket with a shirt collar, a separating front zipper with an inner zip guard, and side panels at front and back quilted in horizontal channels. Two zipper pockets on the front, full lining. Drafted to your own measurements. Recommended fabric: polyester raincoat or jacket fabrics; lining fabric for the inside.

Tech. Description

Insulated Zip-Front Jacket with Shirt Collar and Zipper Pockets

A women's hip-length insulated jacket with a shirt collar, a separating front zipper with an inner zip guard, and side panels at front and back quilted in horizontal channels. Two zipper pockets on the front, full lining.

When To Wear

  • In cool autumn and early spring weather, over a sweater or shirt.
  • For everyday wear and walks with jeans or trousers.

Key Design Features

Silhouette: Slightly fitted through the curved seams of the side panels.

Length: To the hip.

Collar: Shirt collar with an upper and under collar, topstitched along the outer edge; the upper collar is insulated.

Closure: Separating zipper at the centre front. An insulated zip guard sits behind the zipper on the left front.

Sleeves: One-piece set-in sleeves.

Pockets: Two welt pockets with a non-separating zipper set under the opening, stitched 1 mm from the edge; each has a large and a small pocket bag.

Back: One-piece centre back with side back panels.

Finishing: Back, fronts, sleeves, zip guard and upper collar backed with synthetic batting, stitched along the edges; side panels quilted along the marked lines; front edges and hem topstitched.

Lining: Full lining, with a pleat in the front lining, joined to the sleeve hems and the jacket hem.

Level Of Difficulty

Intermediate. Quilting with batting, welt pockets with zippers, a collar, a separating zipper with a zip guard and a bagged lining turned through a sleeve seam.

Fabric Recommendations

Polyester raincoat or jacket fabrics; lining fabric for the inside.

Additional Supplies

  • Lining fabric
  • Synthetic batting (sintepon)
  • Fusible interfacing (pocket welts)
  • 1 separating zipper, length to match the front
  • 2 non-separating zippers, length to match the pocket openings

Cutter's Must

Main fabric:

  • Center Front – 2 pieces
  • Center Back – 1 piece
  • Side Front – 2 pieces
  • Side Back – 2 pieces
  • Sleeve – 2 pieces
  • Upper Collar – 1 piece
  • Lower Collar – 1 piece
  • Center Front Facing – 2 pieces
  • Bigger Pocket Bag – 2 pieces
  • Off-Set Welt – 2 pieces
  • Zipper Placket – 1 piece

Lining:

  • Front Lining – 2 pieces
  • Back Lining – 1 piece
  • Sleeve Lining – 2 pieces
  • Smaller Pocket Bag – 2 pieces
  • Synthetic batting: back the back, fronts, sleeves, zipper placket and upper collar with batting, stitching it on around the edges.

Sewing Instructions

  1. Quilt the side front and side back pieces along the marked lines.
  2. Zip pockets. Fuse interfacing to the off-set welt, fold it in half lengthwise and press. Fuse a strip of straight-grain stay tape under the pocket position. Mark a line on the welt showing its finished width. Place the welt on the right side of the front, matching the pocket marking with the line on the welt; the folded edge of the welt faces the same way as the right side of the front. Stitch the welt on. Cut the pocket opening through the middle between the marked lines, cutting diagonally into the corners of the marking. Turn the welt to the wrong side. Press the seam allowances open. Place the zip under the pocket opening. From the right side of the front, stitch the zip 1 mm from the edge of the opening. Stitch the smaller pocket bag to the lower zip tape and turn it down. Stitch the bigger pocket bag to the upper zip tape. Stitch the edges of the pocket bags together. The edges of the pocket bags should be caught in the zip seam and reach down to the hem line.
  3. Outer jacket. Stitch the side fronts to the center fronts and the side backs to the center back. Stitch the shoulder and side seams. Stitch the sleeve seams. Set the sleeves into the armholes. Stitch around the zipper placket, turn it and topstitch. Stitch the upper collar and lower collar together, turn right side out and topstitch along the outer edge. Stitch the collar into the neckline.
  4. Lining. Stitch the center front facings to the front lining pieces, laying a pleat in the lining. Stitch the front lining, back lining and sleeve lining together, leaving an opening for turning in one sleeve seam.
  5. Zip closure. Stitch the left half of the separating zip onto the zipper placket. Place each zip half on the front edge of the jacket right sides together (teeth pointing away from the edge). Stitch the facings to the front edges, catching the zip and the zipper placket in the seam. The zipper placket must end up on the left front. Turn the jacket right side out.
  6. Stitch the lining to the sleeve hems and the jacket hem. Close the turning opening.
  7. Topstitch the front edges and the hem of the jacket.
  8. Press the finished jacket.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?