Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4528
#4530

Fitted Dress With Contrast Panels

Pattern #4529

A women's fitted knee-length dress with a wrap-effect front: the upper and lower fronts cross over and are edged with wide double-layer bands in a contrast fabric. Elbow-length sleeves with a contrast upper section, a contrast hem band at the back and an invisible zipper at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres with added elastane, plus a contrast or companion fabric for the bands and upper sleeves.

Tech. Description

Fitted Dress With Contrast Panels

A women's fitted knee-length dress with a wrap-effect front: the upper and lower fronts cross over and are edged with wide double-layer bands in a contrast fabric. Elbow-length sleeves with a contrast upper section, a contrast hem band at the back and an invisible zipper at the centre back.

When To Wear

  • At the office or for meetings, on its own or under a jacket.
  • For dinners and family celebrations, with heels.

Key Design Features

Silhouette: Fitted, shaped by bust and waist darts on the front and waist darts on the back.

Length: About knee length; the front hem curves where the lower fronts overlap.

Neckline: Crossover V at the front, its edges finished by the contrast bands; the back neckline is finished with an interfaced facing.

Front: Cut in four parts (left and right upper, left and right lower) joined by a waist seam. Each edge band is cut double, turned and set into the front seams.

Sleeves: Set-in, ending near the elbow, made of an upper part in the contrast fabric and a lower part in the main fabric joined by a horizontal seam.

Back: Centre back seam with an invisible zipper; a double-layer contrast band at the hem, its inner layer enclosing the side seams.

Finishing: Seams overlocked; the inner back band topstitched in the seam of the outer band; sleeve hems turned up and topstitched.

Level Of Difficulty

Advanced. Many double-layer bands set between front parts in a set order, curved edges, two fabrics, darts and an invisible zipper.

Fabric Recommendations

Dress fabrics made from natural or blended fibres with added elastane, plus a contrast or companion fabric for the bands and upper sleeves.

Additional Supplies

  • Contrast or companion fabric
  • Invisible zipper
  • Fusible interfacing (back neckline facings, upper front bands)

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm; hem allowance for sleeve bottom – 2.0 cm. Attention! First of all, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical details).

From main fabric_1:

  • Back - 2 pieces
  • Left upper front - 1 piece
  • Right upper front - 1 piece
  • Left lower front - 1 piece
  • Right lower front - 1 piece
  • Lower sleeve — 2 pieces
  • Back neckline facing — 2 pieces

From main fabric_2:

  • Lower back placket - 2 pieces
  • Left upper front placket - 2 pieces
  • Right upper front placket - 2 pieces
  • Left lower front placket - 2 pieces
  • Right lower front placket - 2 pieces
  • Upper sleeve – 2 pieces

From fusible interfacing:

  • Back neckline facing – 2 pieces
  • Left upper front placket - 1 piece
  • Right upper front placket - 1 piece

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Interface the facing and placket pieces with fusible interfacing.
  2. Stitch the darts on the back and front pieces. Press the waist dart depths towards the center of the pieces, and bust darts upwards.
  3. Serge the center back edges separately on each piece. Stitch the center back seam from the zipper mark to the bottom, press seam allowances open. Insert the concealed zipper.
  4. Fold the left upper placket pieces right sides together and stitch the neckline edge. Clip curves, turn the piece right side out, press. Attach the left placket to the left upper front, press seam allowances towards the front and serge.
  5. Fold the right upper placket pieces right sides together, insert the left upper front between them and stitch the neckline edge. Clip curves, turn the piece right side out, press. Attach the right placket to the right upper front, press seam allowances towards the front and serge.
  6. Fold the left lower placket pieces right sides together and stitch the bottom edge. Clip curves, turn the piece right side out, press. Attach the left placket to the left lower front, press seam allowances towards the front and serge.
  7. Fold the right lower placket pieces right sides together and stitch the outer edge. Clip curves, turn the piece right side out, press.
  8. Fold the left and right lower front parts right sides together, insert the right placket between the pieces and stitch. Press seam allowances towards the front and serge.
  9. Stitch the upper and lower front parts together, press seam allowances upwards and serge.
  10. Fold the back placket pieces right sides together and stitch the bottom edge. Turn the piece right side out, press. Serge the upper edge of the inner placket. Attach the outer placket to the back, press seam allowances towards the placket.
  11. Serge the outer edges of the neckline facings. Place the facings with the dress and stitch the neckline edge. Press seam allowances.
  12. Stitch the shoulder seams, enclosing them with the facing. Press seam allowances towards the back and serge. Turn right side out, straighten, press. Stitch the center back seam allowances of the facings to the zipper tape.
  13. Stitch the side seams, enclosing them with the inner back placket. Press seam allowances towards the back and serge. Turn right side out, straighten, press. Topstitch the inner placket into the seam of attaching the outer placket.
  14. Attach the upper sleeve to the lower, press seam allowances upwards and serge. Stitch the sleeve seam, press seam allowances and serge. Set sleeves into armholes, matching notches. Press seam allowances and serge. Serge the bottom edge of the sleeve, press seam allowances to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?