Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4517
#4519

Fitted Skirt with Pleated Front Overlay

Pattern #4518

A knee-length women's fitted skirt with a pleated overlay panel across the front. The pleats fan out from a curved edge held by a row of buttons; the waist has no waistband and is finished with an interfaced facing. Invisible zipper at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics with good drape in natural or blended fibres, so the pleats fall softly.

Tech. Description

Fitted Skirt with Pleated Front Overlay

A knee-length women's fitted skirt with a pleated overlay panel across the front. The pleats fan out from a curved edge held by a row of buttons; the waist has no waistband and is finished with an interfaced facing. Invisible zipper at the centre back.

When To Wear

  • To the office with a tucked-in blouse or a fine knit top.
  • For daytime events and dinners with a fitted jacket.

Key Design Features

Silhouette: Fitted straight skirt.

Length: To the knee.

Waist: No waistband; the top edge is finished with a fused facing, understitched 0.2 cm from the seam and hand-sewn to the zipper tape.

Front: Front with darts, covered by an overlay panel. The panel's pleats are pressed upwards and fan out towards the side. Its curved front edge is faced on three sides with an upper and a lower facing, and runs down to the hem.

Closure: Invisible zipper in the centre back seam. Seven buttons are sewn along the edge of the overlay through all layers, holding it to the front.

Back: Two back pieces with darts and a centre back seam.

Finishing: 3 cm hem turned up and sewn by hand with blind stitches.

Level Of Difficulty

Intermediate. Forming pleats, facing a shaped panel, finishing a waist with a facing and inserting an invisible zipper.

Fabric Recommendations

Dress fabrics with good drape in natural or blended fibres, so the pleats fall softly.

Additional Supplies

  • Fusible interfacing (waist facings, overlay facings)
  • Invisible zipper
  • 7 buttons

Cutter's Must

From main fabric 1:

  • 1. Back – 2 pieces
  • 2. Front – 1 piece
  • 3. Flounce – 1 piece
  • 4. Back facing – 2 pieces
  • 5. Front facing – 1 piece
  • 6. Upper flounce facing – 1 piece
  • 7. Lower flounce facing – 1 piece

From fusible interfacing:

  • 1. Back facing – 2 pieces
  • 2. Front facing - 1 piece
  • 3. Upper flounce facing – 1 piece
  • 4. Lower flounce facing – 1 piece

Sewing Instructions

  1. Reinforce facings with fusible interfacing.
  2. Stitch darts on the back, press depths towards the center. Overlock the center edges of the back separately on each piece. Stitch the center back seam from the notch to the bottom edge. Press seam allowances open, pressing the slit for the zipper. Insert the zipper.
  3. Stitch darts on the front. Press depths towards the center.
  4. On the flounce, create and secure pleats. Press depths upwards. Stitch the upper and lower flounce facings. Press seam allowances open. Overlock the outer edge. Place the facing on the flounce and stitch along three sides. Trim seam allowances at corners, turn out and press. Hand-stitch the inner edge of the facing to the flounce with blind stitches.
  5. Place the flounce on the front and secure along the side edge. Stitch side seams. Overlock and press seam allowances open.
  6. Stitch side seams of facings, press seam allowances open. Overlock the bottom edge. Place the facing and the skirt right sides together and stitch the upper edge. Topstitch seam allowances to the facing at a distance of 0.2 cm from the stitching line. Turn facings to the wrong side, press. Fold under the center edges and sew to the zipper tape. Attach the facing to the side seam allowances.
  7. Overlock the bottom edge of the garment, press to the wrong side and hem with blind stitches.
  8. Sew buttons onto the front, catching all layers, according to the technical sketch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Additional options

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?