Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4516
#4518

Sleeved Dress With Pockets And Back Zipper

Pattern #4517

An above-knee women's shift dress with short set-in sleeves, a wide double neckline band topstitched onto the bodice, two patch pockets on the front and a concealed zipper at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres.

Tech. Description

Simple Shift Dress with Patch Pockets and Clean Neckline Finish

An above-knee women's shift dress with short set-in sleeves, a wide double neckline band topstitched onto the bodice, two patch pockets on the front and a concealed zipper at the centre back.

When To Wear

  • Spring and summer daywear, on its own or with sandals and flat shoes.
  • Office days in a heavier cotton or wool blend, with tights and a cardigan in cooler weather.

Key Design Features

Silhouette: Straight, slightly widening towards the hem, shaped only by bust darts at the side seams.

Length: Above the knee.

Neckline: Round neckline finished with a wide band made of inner and outer neckline facings stitched together along the neck edge; the band is sewn to the bodice and topstitched 0.2 cm from the seam, so it shows on the outside.

Sleeves: Short set-in sleeves, ending above the elbow, with a turned and topstitched hem.

Front: One piece cut on the fold, with no centre front seam.

Pockets: Two patch pockets with rounded lower corners, topstitched onto the front at the markings; the top edge is turned and stitched.

Back: Centre back seam running to the hem, with a concealed zipper at the top through the neckline band.

Finishing: Shoulder and side seams pressed towards the back and overlocked; hems turned and topstitched.

Level Of Difficulty

Intermediate. Darts, patch pockets, set-in sleeves, a two-layer facing band and one concealed zipper; no collar or lining.

Fabric Recommendations

Dress fabrics made from natural or blended fibres.

Additional Supplies

  • Concealed zipper
  • Fusible interfacing (front and back neckline facings)

Cutter’s Must

From Main Fabric:

  1. Back – 2 pieces
  2. Front – 1 piece (cut on fold)
  3. Sleeve – 2 pieces
  4. Pocket – 2 pieces
  5. Back Neckline Facing – 4 pieces
  6. Front Neckline Facing – 2 pieces

From Fusible Interfacing:

  1. Back Neckline Facing – 2 pieces
  2. Front Neckline Facing – 1 piece

Important Information

Before cutting your fabric:

  • Print and lay out pattern pieces to determine yardage.
  • Check mirrored pieces, notches, and grainlines.
  • For patterned fabrics, align carefully for symmetry.

Assembly Instructions

1. Interfacing

Apply fusible interfacing to the Back Neckline Facing and Front Neckline Facing.

2. Center Back Seam

Overlock the center back edges.

Stitch the center back seam from the zipper notch to the hem.

Press the seam allowances open.

3. Front Darts

Stitch the darts on the Front.
Press the dart intake upward.

4. Pockets

Overlock the Pocket pieces along the edges.

Turn the seam allowances to the inside and press.

Turn the upper seam allowance of the Pocket to the wrong side and topstitch.

Topstitch the Pocket onto the Front according to the markings.

5. Shoulder and Side Seams

Stitch the shoulder and side seams, press the seam allowances toward the Back, and overlock.

6. Neckline Facing

Stitch the shoulder seams of the inner and outer Back Neckline Facing and Front Neckline Facing.
Press the seam allowances open.

Place the facings right sides together and stitch along the neckline.

Attach the facings to the Front and Back.

Overlock the seam allowance and press toward the facing.

Topstitch along the facing at 0.2 cm from the seam.

7. Zipper

Insert the zipper.

8. Sleeves

Stitch the sleeve seam of the Sleeve pieces.
Overlock the seam allowance and press toward the Back.

Set the sleeves into the armholes, matching notches.
Overlock the seam allowance.

9. Hem

Overlock the hem allowances of the dress and sleeves.

Press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?