Chinese Style Blouse
A fitted hip-length women's blouse with an asymmetric curved wrap front, a stand collar that continues from the fronts, piping along the front edge and collar, and five buttons with rouleau loops. Short cap sleeves.
When To Wear
- For work in summer, tucked into or worn over a pencil skirt or straight trousers.
- For dinners and events when made in a dense silk blouse fabric.
Key Design Features
Silhouette: Fitted, shaped with bust, waist and shoulder darts on the front and back.
Length: Hip length, straight hem turned twice by 1 cm and topstitched.
Collar: Stand collar: at the front it rises from the fronts and forms a V opening; at the back a separate outer and inner stand is set into the neckline and joined to the fronts at the shoulder seams.
Closure: One front overlaps the other in a curved line from the collar to the hem and fastens with five buttons and rouleau loops set into the facing seam; the underlap is held by an inner button and buttonhole. A decorative closure is stitched on.
Front: Two fronts with separate front facings; the front edge and collar edge are finished with ready-made piping.
Sleeves: Short cap sleeves set into the armholes, hem turned and topstitched.
Back: Centre back seam, with waist and shoulder darts.
Level Of Difficulty
Intermediate. Several dart sets, a stand collar joined at the shoulder seams, rouleau loops made from a bias strip, and piping inserted into the facing seam.
Fabric Recommendations
Dense blouse fabrics made from natural or blended fibres.
Additional Supplies
- Fusible interfacing (inner stand collar, front facings, back neckline facing)
- 6 buttons
- Ready-made piping (approximate length marked on the front pattern piece)
- Decorative closure
Cutter's Must
From main fabric:
- Back – 2 pieces
- Front – 2 pieces
- Sleeve – 2 pieces
- Stand Collar – 2 pieces
- Center Front Facing – 2 pieces
- Back Neckline Facing – 1 piece
From fusible interfacing:
- Stand Collar – 1 piece
- Center Front Facing – 2 pieces
- Back Neckline Facing – 1 piece
Sewing Instructions
- Fuse interfacing to the inner Stand Collar, the Center Front Facings and the Back Neckline Facing.
- Mark and stitch the bust, waist, and shoulder darts on the front and back. Press bust darts upwards, and waist and shoulder darts towards the center of the pieces.
- Stitch the center back seam. Press seam allowances towards the left side seam and serge.
- Stitch the outer Stand Collar to the back neckline, clip seam allowances, and press towards the stand collar.
- Stitch the side seams, and the shoulder seams together with the stand collar edges. Press seam allowances towards the back and serge.
- Stitch the inner Stand Collar to the neckline of the Back Neckline Facing, press seam allowances open. Stitch and press open the shoulder seams joining the Back Neckline Facing and the Center Front Facings. Serge the outer edge.
- Cut a bias strip 2.5 cm wide and 20 cm long. Fold the strip in half lengthwise, right sides together, and stitch 0.3 cm from the fold. Trim seam allowances close to the stitching, turn the strip right side out, and shape the rouleau. Cut it into loops. The length of one loop is approximately 4 cm.
- Place the Center Front Facing on the right side of the Front, right sides together, pin, and stitch along the front edge and the stand collar edge, inserting the finished piping and rouleau loops according to markings. Trim seams at corners. Turn the front edges and stand collar right side out, and shape the seams.
- Serge the lower edge of the sleeve, press to the wrong side, and topstitch. Stitch and serge the sleeve seams. Set the sleeves into the armholes, press, and serge.
- Press the bottom of the garment to the wrong side by 1 cm, then another 1 cm, and topstitch.
- Stitch on the decorative closure. Sew on the buttons. Make a buttonhole on the inner (underlapping) front. Sew on the corresponding button.