Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4518
#4520

Pleated Bodice Fit-and-Flare Dress with Pointed Collar

Pattern #4519

A sleeveless knee-length women's dress with a fitted bodice and a flared skirt joined at a waist seam. The wide neckline frames a crossover insert of pleated contrast fabric; a collar folded in half finishes the neckline and lies flat with pointed ends at the back. Drafted to your own measurements. Recommended fabric: dress fabrics in natural or blended fibres; a contrast fabric for the neckline insert.

Tech. Description

Pleated Bodice Fit-and-Flare Dress

A sleeveless knee-length women's dress with a fitted bodice and a flared skirt joined at a waist seam. The wide neckline frames a crossover insert of pleated contrast fabric; a collar folded in half finishes the neckline and lies flat with pointed ends at the back.

When To Wear

  • For summer daytime events, garden parties and weddings as a guest.
  • With a cardigan or a short jacket in spring.

Key Design Features

Silhouette: Fitted bodice, flared skirt.

Length: Around the knee.

Neckline: Wide, square-cut neckline filled with a crossover insert. Each side of the insert is two layers of contrast fabric, the outer layer pleated with the pleats facing down; the right side overlaps the left.

Collar: One interfaced piece folded lengthwise, stitched at the ends and attached with the insert sandwiched between collar and bodice; seam topstitched onto the front.

Sleeves: Sleeveless; armholes finished with a 4 cm bias strip folded in half and topstitched along the fold.

Front: Bodice cut in a centre panel and two side panels with princess seams; the front skirt is cut on the fold.

Back: Upper back with darts, joined to the back skirt at the waist; centre back seam.

Closure: Invisible zipper in the centre back seam.

Finishing: 1.5 cm hem turned up and topstitched.

Level Of Difficulty

Intermediate. Pleating a layered insert, setting it in with the collar, princess seams, bias-bound armholes and an invisible zipper.

Fabric Recommendations

Dress fabrics in natural or blended fibres; a contrast fabric for the neckline insert.

Additional Supplies

  • Contrast fabric for the insert
  • Fusible interfacing (collar)
  • Invisible zipper
  • Bias binding 4 cm wide, or cut from the fabric

Cutter's Must

From main fabric:

  • Upper back - 2 pieces
  • Lower back – 2 pieces
  • Upper center front - 1 piece
  • Upper side front – 2 pieces
  • Lower front - 1 piece on fold
  • Collar - 1 piece

From contrast fabric:

  • Inner front insert – 2 pieces
  • Outer front insert – 2 pieces

From fusible interfacing:

  • Collar - 1 piece

Sewing Instructions

  1. Fuse the collar piece with fusible interfacing.
  2. Stitch darts on upper back PANELs, press dart intake towards the center. Stitch upper and lower back PANELs, press seam allowance upwards and serge. Serge the center edges of the back separately. Stitch the center edge of the back from the zipper mark to the lower edge, press seam allowances open. Insert the zipper.
  3. Form and secure pleats on the outer front inserts (pleat depths directed downwards). Fold the insert pieces right sides together and stitch the upper edge, clip seam allowances at curves. Turn the pieces right side out, straighten and press. Overlap the right insert on the left, secure at the lower edge, and then treat as one piece.
  4. Fold the collar piece lengthwise in half, right side in, and stitch the ends. Turn the collar right side out, straighten, and press.
  5. Stitch the princess seams of the front. Serge seam allowances and press towards the center. Place the collar with the front and stitch, inserting the insert between the pieces. Clip seam allowances at curves, press and serge, topstitch onto the front.
  6. Stitch the upper and lower front PANELs, press seam allowances upwards and serge.
  7. Stitch the side seams, press seam allowances towards the back, serge.
  8. Cut (if not pre-made) bias binding 4 cm wide, length equal to armhole length + 4 cm. Fold the bias binding lengthwise in half, right side out, and press. Place the binding with the armhole edge on the right side and stitch, fold the binding to the wrong side and topstitch along the fold onto the main piece.
  9. Serge the lower edge of the dress, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?