Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4466
#4468

Shaped Front Zip Top with Trim

Pattern #4467

A women's fitted top in knit fabric with short cap sleeves, curved princess seams piped with decorative trim, and an asymmetric front: a left yoke meets the front along a diagonal line closed with an exposed zipper edged in trim. Drafted to your own measurements. Recommended fabric: knit fabrics with medium stretch, of natural or blended fibres.

Tech. Description

Shaped Front Zip Top with Trim

A women's fitted top in knit fabric with short cap sleeves, curved princess seams piped with decorative trim, and an asymmetric front: a left yoke meets the front along a diagonal line closed with an exposed zipper edged in trim.

When To Wear

  • In spring and summer with skirts, trousers or jeans.
  • Under an open jacket for work.

Key Design Features

Silhouette: Fitted, shaped by curved princess seams front and back; straight hem at hip level.

Neckline: Round neckline bound with knit binding.

Sleeves: Short cap sleeves set into the armhole; lower edge bound with bias binding.

Front: A one-piece centre front with a diagonal upper edge, a separate left front yoke, and side fronts. The zipper sits between the yoke and the front, topstitched 0.5 mm from the teeth, with a strip of decorative trim along the tape.

Back: Centre back seam, back darts, and princess seams with trim inserted.

Finishing: Armhole seams finished with knit binding; hem turned twice by 1 cm and topstitched.

Level Of Difficulty

Intermediate. Piping inserted into curved seams, an exposed zipper on a diagonal edge, and binding on knit fabric.

Fabric Recommendations

Knit fabrics with medium stretch, of natural or blended fibres.

Additional Supplies

  • Zipper
  • Decorative trim, 0.5 cm wide
  • Knit binding

Cutter's Must

  • Center Back – 2 pieces
  • Side Back – 2 pieces
  • Center Front – 1 piece
  • Side Front – 2 pieces
  • Left Front Yoke – 1 piece
  • Sleeve – 2 pieces

Sewing Instructions

  1. Stitch the darts on the back and press them towards the centre. Stitch the centre back seam (Center Back pieces). Overlock the seam allowance and press it to the left side. Stitch the back princess seams (Center Back to Side Back), inserting the decorative trim. Overlock the seam allowance and press it towards the centre.
  2. Stitch and overlock the shoulder seams. Bind the neckline with knit binding. Overlock the diagonal upper edge of the Center Front and the lower edge of the Left Front Yoke. Press these seam allowances to the wrong side.
  3. Cut a strip of decorative trim to the length of the zipper tape. Fold it lengthwise, right sides together, and stitch across the corner. Turn it right side out and press. Place the trim on the right side of the zipper tape and baste it along the tape edges; the stitched corner should be at the zipper pull. Place the zipper under the pressed edges of the Center Front and the Left Front Yoke, baste, and topstitch from the right side 0.5 mm from the zipper teeth.
  4. Stitch the front princess seams (Center Front to Side Front), inserting the decorative trim. Overlock the seam allowance and press it away from the centre.
  5. Bind the lower edge of the Sleeve with bias binding. Set the sleeve into the armhole. Overlock the seam allowance. Fold the knit binding lengthwise in half, wrong sides together, and press. Place the binding on the armhole edge from the right side and stitch. Clip the seam allowances. Turn the binding to the wrong side and topstitch along the fold onto the garment. Press the seam.
  6. Turn the hem of the top twice by 1 cm to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?