Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4467
#4469

Princess Seam Peplum Top

Pattern #4468

A fitted women's top with princess seams front and back, an asymmetric shoulder yoke and neckline edged with decorative piping, a hip band joined at the waist and a cascading flounce on the front. Invisible zipper in the centre back seam. Drafted to your own measurements. Recommended fabric: double-faced dress fabrics of natural or blended fibres that drape well.

Tech. Description

Princess Seam Peplum Top

A fitted women's top with princess seams front and back, an asymmetric shoulder yoke and neckline edged with decorative piping, a hip band joined at the waist and a cascading flounce on the front. Invisible zipper in the centre back seam.

When To Wear

  • At the office with a pencil skirt or slim trousers.
  • For dinners and celebrations in spring and autumn.

Key Design Features

Silhouette: Close-fitting through the bust and waist, shaped by princess seams from the armholes.

Length: Hip length.

Neckline: Wide, shallow neckline finished with facings, with decorative piping set into the edge.

Sleeves: One-piece set-in sleeves, three-quarter length on the drawing.

Front: Centre and side fronts joined by princess seams; an asymmetric yoke on one shoulder and a front insert attached with piping in the seam.

Waist: Horizontal waist seam joining the bodice to a separate lower front and lower back. A flounce, its lower edge bound with bias tape, is folded and caught into the upper and side edges of the lower front, falling in a cascade.

Back: Centre back seam with an invisible zipper, princess seams and a waist seam.

Finishing: Sleeve hems and the lower edge turned up 2 cm and topstitched.

Level Of Difficulty

Intermediate. Piping inserted into the neckline and front insert seam, a yoke stitched exactly to a marked line, a bias-bound flounce caught into a seam and an invisible zipper.

Fabric Recommendations

Double-faced dress fabrics of natural or blended fibres that drape well.

Additional Supplies

  • Fusible interfacing (neckline facings)
  • Decorative piping
  • Bias tape
  • Invisible zipper

Cutter's Must

From main fabric:

  • 1. Center back - 2 pieces
  • 2. Side back - 2 pieces
  • 3. Left side front — 1 piece
  • 4. Right side front — 1 piece
  • 5. Center front - 1 piece
  • 6. Sleeve – 2 pieces
  • 7. Lower front — 1 piece
  • 8. Back neckline facing — 2 pieces
  • 9. Front neckline facing 1 — 1 piece
  • 10. Front neckline facing 2 — 1 piece
  • 11. Lower back — 2 pieces
  • 12. Front Yoke — 1 piece
  • 13. Flounce — 1 piece
  • 14. Front Insert — 1 piece

From fusible interfacing:

  • 1. Back neckline facing — 2 pieces
  • 2. Front neckline facing 1 — 1 piece
  • 3. Front neckline facing 2 — 1 piece

Sewing Instructions

  1. Fuse fusible interfacing to facings.
  2. Stitch the princess seams of the back. Overlock seam allowances and press towards the center. Attach the lower back panels. Overlock seam allowances and press upwards. Overlock the center back seam separately on each piece. Stitch the center back seam from the zipper mark downwards. Press open the seam allowances, pressing the slit. Insert the zipper.
  3. Stitch the princess seams of the front. Overlock seam allowances and press towards the center. Attach the front insert, inserting decorative trim strip. Overlock seam allowances and press towards the center.
  4. Finish the lower edge of the flounce with bias binding. Fold the flounce in half, short side up. Place the flounce on the lower front and secure along the upper and side edges. Then treat as one piece.
  5. Attach the lower front to the front. Overlock seam allowances and press upwards.
  6. Stitch the side and shoulder seams. Overlock seam allowances and press towards the back. Attach the yoke to the front strictly up to the marked stitching line. Press open and overlock seam allowances.
  7. Stitch the shoulder seams of the facings, press open seam allowances. Stitch the front facings strictly up to the marked stitching line. Press open seam allowances. Overlock the outer edge. Place decorative trim strip on the neckline and secure. Place the facing on the neckline and stitch. Clip seam allowances and turn facings to the wrong side. Sew the facing to the shoulder seams and the center back seam.
  8. Stitch the sleeve seam. Overlock seam allowances and press towards the back. Set the sleeves into the armholes according to the notches. Overlock the lower sleeve edge, press to the wrong side and topstitch.
  9. Overlock the lower edge of the blouse, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?