Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4448
#4450

Jersey Top with Flounced Neckline

Pattern #4449

A sleeveless women's top for knit fabric, hip length, with the front gathered along both side seams and three layers of flounces at the neckline and shoulders. Lined with knit lining. Drafted to your own measurements. Recommended fabric: medium-stretch knit fabric of natural or blended fibres.

Tech. Description

Jersey Top with Flounced Neckline

A sleeveless women's top for knit fabric, hip length, with the front gathered along both side seams and three layers of flounces at the neckline and shoulders. Lined with knit lining.

When To Wear

  • In spring and summer on its own, with skirts or trousers.
  • Under an open jacket or cardigan, with the flounces left on show at the neckline.

Key Design Features

Silhouette: Close-fitting; the front is longer at the sides and gathered into the side seams, forming soft drapes across the body. The back is smooth.

Length: To the hip.

Neckline: Wide rounded neckline. At the front, flounce 1 is set into the neckline, while flounces 2 and 3 are topstitched onto the front along marked lines, framing a square panel and falling over the shoulders. At the back, all three flounces are set into the neckline in layers.

Sleeves: Sleeveless; armholes are faced with the lining.

Closure: None, pulled on over the head.

Finishing: Outer edges of the flounces are faced and turned; the hem is turned up 1.5 cm and topstitched with a twin needle so it keeps its stretch.

Lining: Front and back lining in knit fabric, finishing the neckline and armholes.

Level Of Difficulty

Intermediate. Gathering knit side seams, layering and setting three faced flounces, and a lining that finishes the neckline and armholes in two steps.

Fabric Recommendations

Medium-stretch knit fabric of natural or blended fibres. Knit fabric for the lining.

Additional Supplies

  • Knit lining fabric
  • Twin needle for the hem

Cutter's Must

From main fabric:

  • Back – 1 piece
  • Front – 1 piece
  • Flounce 1 – 2 pieces
  • Flounce 2 – 2 pieces
  • Flounce 3 – 2 pieces

From lining fabric:

  • Front Lining – 1 piece
  • Back Lining – 1 piece

Tip: When sewing knit fabrics, use a special elastic stitch or a narrow zigzag stitch. When serging, trim seam allowances to 0.8 cm. The hem allowance should be topstitched with a twin needle to maintain elasticity. Alternatively, you can sew the pieces directly on a 3- or 4-thread serger.

Sewing Instructions

  1. Along both side edges of the Front, sew a row of long stitches with a loosened upper thread and pull up the gathers.
  2. Stitch the two layers of Flounce 1 together along the outer edge and turn right side out. Stitch the two layers of Flounce 2 together along the outer edge and turn right side out. Match the raw edges of Flounce 2. Clip the seam allowance at the shoulder seam mark. Serge the section from the mark to the side edge. Stitch the two layers of Flounce 3 together along the outer edge and turn right side out. Clip the seam allowance at the corner by the shoulder edge. Match the seam allowances of all the flounces along the back neckline. Stitch the shoulder seams, catching in the seam allowance of Flounce 3. Set Flounce 1 into the front neckline; into the back neckline set all three flounces together. Topstitch Flounce 2 onto the Front along the markings. Topstitch Flounce 3 onto the Front as shown in the technical drawing.
  3. Stitch the shoulder seams of the Front Lining and Back Lining. Press the seam allowances open. Place the lining on the top, right sides together, and stitch the neckline. Turn the lining to the wrong side.
  4. Stitch the side seams of the top and of the lining.
  5. Finish the armhole edges with the lining in two steps: first the front armhole, then the back armhole.
  6. Serge the hem allowance of the top, press it to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?