Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4447
#4449

Keyhole Neckline Blouse with Elasticated Hem

Pattern #4448

A loose women's blouse with a front yoke, two pressed pleats down the centre front and a keyhole slit at the neck closed with one button and loop. The hem is finished with a band shirred with elastic thread, so the body blouses over it; long sleeves are gathered into bound cuffs with a slit. Drafted to your own measurements. Recommended fabric: blouse fabrics in natural or blended fibres.

Tech. Description

Keyhole Neckline Blouse with Elasticated Hem

A loose women's blouse with a front yoke, two pressed pleats down the centre front and a keyhole slit at the neck closed with one button and loop. The hem is finished with a band shirred with elastic thread, so the body blouses over it; long sleeves are gathered into bound cuffs with a slit.

When To Wear

  • With trousers, jeans or a straight skirt, for the office or everyday wear.
  • In spring and summer in light fabrics; under a jacket in cooler weather.

Key Design Features

Silhouette: Loose body drawn in at the hem by a shirred band.

Length: Hip length.

Neckline: Round, bound with bias binding, with a keyhole slit at the centre front also bound with bias; fastened with one button and a rouleau loop.

Front: Horizontal yoke seam; two pleats below the yoke, turned away from the centre.

Sleeves: Long, set into an open armhole and closed together with the side seams. The lower edge is gathered and bound with bias binding; a bound slit fastens with a button and loop.

Back: One piece cut on the fold.

Waist: Folded hem band joined from a front and a back piece, topstitched with parallel rows of elastic thread.

Level Of Difficulty

Intermediate. Bias-bound slits at the neck and sleeves, bias-bound neckline and cuffs with rouleau loops, and shirring with elastic thread.

Fabric Recommendations

Blouse fabrics in natural or blended fibres.

Additional Supplies

  • 3 buttons
  • Elastic thread

Cutter's Must

From main fabric:

  • 1. Back — 1 piece on fold
  • 2. Front Yoke – 1 piece
  • 3. Front — 1 piece on fold
  • 4. Sleeve — 2 pieces
  • 5. Back Placket — 1 piece
  • 6. Front Placket — 1 piece

Sewing Instructions

  1. Fold and secure the pleats on the front (depths directed from the center). Stitch the front yoke to the front, press seam allowances upwards and serge.
  2. Make a slit on the front along the marked line up to the notch. Cut a bias binding from the main fabric, 4 cm wide and a length equal to twice the slit length + 4 cm. Fold the bias binding in half lengthwise and press. Press the outer seam allowances towards the center. Finish the front slit with bias binding.
  3. Stitch the shoulder seams, press seam allowances towards the back and serge.
  4. Cut a trim strip on the bias, 3 cm wide and 10 cm long. Fold the trim strip in half lengthwise and stitch 0.3 cm from the fold. Trim the seam allowances and turn the piece right side out. Cut three loops.
  5. Cut a bias binding 4 cm wide, with a length equal to the neckline length + 4-5 cm. Fold the bias binding in half lengthwise, fold the outer edges towards the center and press again. Bind the neckline, inserting the loop. Sew on a button.
  6. Make a slit on the sleeve along the marked line. Cut a bias binding from the main fabric, 4 cm wide and a length equal to twice the slit length + 4 cm. Fold the bias binding in half lengthwise and press. Press the outer seam allowances towards the center. Finish the sleeve slit with bias binding.
  7. Set the sleeve into the open armhole. Serge the seam allowances and press towards the sleeve.
  8. Stitch the side seam simultaneously with the sleeve seam. Serge the seam allowance and press towards the back.
  9. Along the bottom edge of the sleeve, stitch with a loosely tensioned thread and gather. Cut a bias binding from the main fabric, 4 cm wide and the length indicated on the sleeve pattern piece. Fold the bias binding in half lengthwise and press. Press the outer seam allowances towards the center. Bind the bottom of the sleeve with bias binding, inserting the loop. Sew on a button.
  10. Stitch the plackets together, press seam allowances open. Fold the placket in half lengthwise, right side out, and press. Stitch the placket to the bottom of the garment, press seam allowances upwards and serge. Topstitch parallel decorative stitches around the waist with elastic thread.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?