Sheath Dress Contrast V-Yoke
A knee-length women's sheath dress with a deep, curved V-shaped yoke at the front and a shaped yoke at the back, both cut from a contrast fabric, and three-quarter sleeves with a contrast insert. Centre seams with vents at front and back.
When To Wear
- At the office, on its own or with a cardigan.
- For daytime events and dinners in spring and autumn, with heeled shoes.
Key Design Features
Silhouette: Fitted sheath, shaped with bust darts and waist darts.
Length: To the knee.
Neckline: Round, finished with facings; a short opening at the centre back neck closes with one button and a bias loop.
Front: Contrast yoke forming a deep V from the shoulders to the bust; a centre front seam below it ends in a vent at the hem.
Sleeves: Three-quarter length, set in, each made of three parts: back sleeve, contrast insert and front sleeve.
Back: Contrast yoke, centre back seam with a vent at the hem.
Closure: Invisible zip in the left side seam, between two notches.
Finishing: Vent edges topstitched; sleeve hems topstitched; dress hem sewn by hand with blind stitches.
Level Of Difficulty
Intermediate. A V-shaped yoke joined to the fronts in one seam with the centre seam, two vents, a three-part sleeve, a neck opening with a loop and an invisible zip.
Fabric Recommendations
Dress fabrics in natural or blended fibres with added elastane, plus a contrast or coordinating fabric for the yokes, sleeve inserts and neckline facings.
Additional Supplies
- Invisible zip
- Fusible interfacing (neckline facings, vents)
- 1 button
Cutter's Must
From main fabric_1:
- Back - 2 pieces
- Front - 1 piece
- Back of sleeve — 2 pieces
- Front of sleeve — 2 pieces
From main fabric_2:
- Back Yoke - 2 pieces
- Front Yoke - 1 piece
- Sleeve Insert – 2 pieces
- Front neckline facing – 1 piece
- Back neckline facing – 2 pieces
From fusible interfacing:
- Front neckline facing – 1 piece
- Back neckline facing – 2 pieces
Sewing Instructions
- Fuse the facing pieces with fusible interfacing.
- Stitch the darts on the back and front pieces. Press the waist dart allowances towards the center of the pieces, and the bust darts upwards.
- Attach the back yoke to the back, press seam allowances upwards, and overlock.
- On both back pieces, fuse the vent from the wrong side. Overlock the center edges separately on each piece. On the right side, mark the center seam line (vent fold line). Stitch the center edge of the back from the mark to the vent corner. Clip the vent seam allowance corner. Press open the center seam allowances, press the vent to the left side. Press the right side of the vent 1 cm to the wrong side and topstitch. Topstitch the vent seam allowances to the main piece with machine stitching.
- On both front pieces, fuse the vent from the wrong side. Overlock the center edges separately on each piece. On the right side, mark the center seam line (vent fold line). Attach the front yoke to the left front, press seam allowances towards the yoke and overlock. Attach the right front with one seam to the yoke and the left front up to the vent corner. Clip the vent seam allowance corner. Press open the center seam allowances, press the vent to the left side. Press the right side of the vent 1 cm to the wrong side and topstitch. Topstitch the vent seam allowances to the main piece with machine stitching.
- Stitch the shoulder edges, press seam allowances towards the back and overlock.
- Stitch the right side seam, press seam allowances towards the back and overlock. Overlock the left side edges separately, stitch from the armhole to the first mark and from the second mark to the bottom, press open. Insert the zipper.
- Cut a bias binding strip 3 cm wide and 7 cm long. Fold the strip in half lengthwise and stitch 0.3 cm from the fold. Trim the seam allowances and turn the piece right side out. Adjust the loop length.
- Stitch the center edge of the back neckline facings from the mark to the bottom, press seam allowances open. Stitch the shoulder edges of the facings, press seam allowances open. Overlock the outer edge. Place the dress with the facing right sides together, aligning the neckline edges. Stitch the neckline edge and the slit on the back, inserting the loop. Clip the seam allowances at the curves, turn the pieces right side out and press. Attach the facing to the shoulder seams. Sew on the button.
- Attach the sleeve insert to the back. Press seam allowances towards the insert, overlock. Attach the front of the sleeve to the insert and the back with one seam. Press seam allowances towards the insert, overlock. Stitch the sleeve edge, press seam allowances and overlock. Set the sleeves into the armhole, matching the notches. Press seam allowances and overlock. Overlock the bottom edge of the sleeve, press seam allowances to the wrong side and topstitch.
- Overlock the hem allowance of the dress, press to the wrong side and hem with blind stitches.