CUTTER'S MUST
- Center BACK PANEL with pin tucks - QTY 2
- Side BACK PANEL with pin tucks - QTY 2
- Center FRONT PANEL - QTY 1
- Right Side FRONT PANEL - QTY 1
- Left Lower FRONT PANEL – QTY 1
- Left Upper FRONT PANEL – QTY 1
- COLLAR – QTY 1
Sewing Instructions
- Stitch the princess seams and the center seam of the BACK PANEL. Press the seams towards the center and serge. Press the center seam to the left side and serge.
- Attach the left and right SIDE PANELS to the center FRONT PANEL. Serge the SEAM ALLOWANCES and press towards the center.
- Stitch the shoulder seams. Press the seams towards the BACK PANEL and serge.
- Cut a BIAS BINDING equal to the armhole length. Fold the BIAS BINDING in half lengthwise, right sides out, and press. Align the BIAS BINDING with the armhole edge on the right side and stitch, then fold the BIAS BINDING to the wrong side, clip the seams, and topstitch along the fold to the main piece. Press the seam.
- Attach the outer COLLAR to the neckline and the upper edge of the center and SIDE PANEL. Clip the SEAM ALLOWANCE at the “arrow” NOTCH. Fold the inner COLLAR's SEAM ALLOWANCE inwards and topstitch into the outer COLLAR's attachment seam. Attach the inner COLLAR section to the upper edge of the left lower part.
- Stitch the upper and lower left FRONT PANELS, inserting the COLLAR. Overlap the COLLAR towards the center relative to the attachment seam. Serge the SEAM ALLOWANCE. Stitch the left side seam, inserting the COLLAR, also overlapped by half its width. Serge the SEAM ALLOWANCE and press towards the BACK PANEL.
- Serge the right side seams. Insert the ZIPPER.
- Serge the bottom edge of the garment, press to the wrong side, and topstitch.
