Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4437
#4439

Hip-Length Vest with Buckle Belt

Pattern #4438

A women's fully lined, hip-length sleeveless vest with a wrap front, a stand collar running into the front edges, princess seams above a horizontal waist insert, and a self-fabric belt fastened with a buckle. Drafted to your own measurements. Recommended fabric: suiting fabrics of natural or blended fibres.

Tech. Description

Hip-Length Vest with Buckle Belt

A women's fully lined, hip-length sleeveless vest with a wrap front, a stand collar running into the front edges, princess seams above a horizontal waist insert, and a self-fabric belt fastened with a buckle.

When To Wear

  • Over a blouse or a fine knit with trousers for the office.
  • In spring and autumn over a shirt, or on its own on warmer days.

Key Design Features

Silhouette: Fitted, shaped by princess seams, side panels and a waist insert.

Length: Hip length, with a 3 cm hem allowance.

Collar: Two-layer interfaced stand collar continuing into the faced front edges, forming a V-shaped wrap neckline.

Sleeves: Sleeveless; the shoulders extend slightly over the shoulder point, and the armholes are finished with the lining.

Front: Upper front in centre and side pieces with a princess seam, a horizontal waist insert and a lower front. Front edges faced and understitched 0.2 cm from the seam.

Closure: Wrap front held by a hidden button on the left front and a two-piece belt: one end sewn into the left side seam, the other, with the buckle, into the front edge.

Back: Upper back in centre and side pieces with princess seams, a waist insert and a lower back; side panels between back and front.

Lining: Full lining, bagged out through an opening in the right front lining seam.

Level Of Difficulty

Intermediate. Many panels to match at the waist inserts, a collar joined to faced front edges, belt pieces set into seams and a bagged lining.

Fabric Recommendations

Suiting fabrics of natural or blended fibres.

Additional Supplies

  • Lining fabric
  • Fusible interfacing (collar stand, front facings, back neck facing)
  • 1 buckle
  • 1 button

Cutter's Must

From main fabric:

  • Upper center back – 1 piece
  • Upper side back – 2 pieces
  • Back insert – 1 piece
  • Lower back – 1 piece
  • Side – 2 pieces
  • Lower front – 2 pieces
  • Front insert – 2 pieces
  • Upper side front – 2 pieces
  • Upper center front – 2 pieces
  • Collar stand – 2 pieces
  • Front facing – 2 pieces
  • Back neckline facing – 1 piece
  • Right belt – 1 piece
  • Left belt – 1 piece

From lining fabric:

  • Upper center back – 1 piece
  • Upper side back – 2 pieces
  • Lower back lining – 1 piece
  • Side – 2 pieces
  • Lower front lining – 2 pieces
  • Upper side front – 2 pieces
  • Upper center front lining – 2 pieces

Attention: back pieces from lining are cut according to the main pattern pieces, subtracting the width of the back neckline facing.

From fusible interfacing:

  • Collar stand – 1 piece
  • Front facing – 2 pieces
  • Back neckline facing – 1 piece

Sewing Instructions

  1. Fuse fusible interfacing to the designated pieces.
  2. Fold the belt pieces lengthwise in half, right sides together, and stitch along the long edge and one short edge. Turn the pieces right side out, shape, and press.
  3. Stitch the princess seams of the upper back, press seam allowances open. Attach the insert to the back, press seam allowances towards the insert. Attach the lower back to the insert, press seam allowances towards the insert. Stitch the outer collar stand to the neckline.
  4. Stitch the princess seams of the upper front, press seam allowances open. Attach the insert to the front, press seam allowances towards the insert. Attach the lower front to the insert, press seam allowances towards the insert.
  5. Attach the side to the back, press seam allowances towards the side. Attach the side to the front, inserting the belt into the left seam, press seam allowances towards the side.
  6. Stitch and press open the shoulder seams.
  7. Stitch the inner collar stand to the neckline facing. Stitch and press open the shoulder seams of the back neckline facing and the front facing. Thread the buckle onto the right belt. Place the front facing with the facing right side down onto the right side of the front, pin, and stitch the front edge, neckline, and lower corner of the front edge, inserting the belt with the buckle. Trim the seams at the corners. Understitch the front edge facing seam allowance to the front facing. The stitching should be 0.2 cm from the seam. Turn the front edges right side out, shape the seams. Press the bottom edge of the garment.
  8. On the lining fabric pieces, stitch the seams, leaving an opening in the front right seam. Attach the lining to the inner edges of the front facings and the back neckline facing.
  9. Attach the lining to the bottom of the vest. Stitch the armholes. Turn the vest right side out through the opening. Stitch the opening closed.
  10. On the left front, make a buttonhole. Sew a hidden button corresponding to it.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?