Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4436
#4438

Fitted Collared Dress with Sleeves

Pattern #4437

A fitted women's dress of knee length with curved princess seams on the front and back, a flared lower part joined at a low curved seam, a deep V-neck with a cut-in-one collar and short cap sleeves. Invisible zipper in the left side seam. Drafted to your own measurements. Recommended fabric: dress fabrics with good drape, of natural or blended fibres.

Tech. Description

Fitted Collared Dress with Sleeves

A fitted women's dress of knee length with curved princess seams on the front and back, a flared lower part joined at a low curved seam, a deep V-neck with a cut-in-one collar and short cap sleeves. Invisible zipper in the left side seam.

When To Wear

  • In summer, for the office or daytime events.
  • With heeled shoes for dinners and family celebrations.

Key Design Features

Silhouette: Fitted bodice and hips; the lower part flares from a seam that dips low at the centre front and back.

Length: Knee length.

Collar: Deep V-neck with a collar cut in one with the centre front; the collar has a centre back seam and is set into the back neckline. The front neckline facing and the lower point of the V are interfaced.

Sleeves: Short cap sleeves set into the armholes; armhole and sleeve edge finished together with a 4 cm bias strip folded in half.

Front: Centre front cut on the fold, with curved princess seams to the side fronts.

Closure: Invisible zipper in the left side seam, above the joining seam of the lower front.

Back: Centre back seam and curved princess seams; lower back cut on the fold.

Skirt: Flared lower front and lower back, each cut in one piece on the fold.

Finishing: Seams overlocked; hem overlocked, turned up and topstitched.

Level Of Difficulty

Intermediate. Curved princess seams, a curved joining seam for the lower part, a cut-in-one collar finished with a facing, an invisible zipper and bias-bound armholes.

Fabric Recommendations

Dress fabrics with good drape, of natural or blended fibres.

Additional Supplies

  • Invisible zipper
  • Fusible interfacing (front neckline facing, lower part of the V-neck)
  • Bias binding 4 cm wide, or a bias strip cut from the fabric

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm; dress hem allowance 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).

From main fabric:

  • Center Back – 2 pieces
  • Center Front – 1 piece on fold
  • Lower Back – 1 piece on fold
  • Lower Front – 1 piece on fold
  • Side Back – 2 pieces
  • Side Front – 2 pieces
  • Front Neckline Facing – 1 piece
  • Sleeve – 2 pieces

From fusible interfacing:

  • Front Neckline Facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the Front Neckline Facing and to the lower section of the neckline opening on the Center Front.
  2. Stitch the center back seam. Overlock the seam allowance and press it towards the left. Stitch the princess seams of the back (Center Back to Side Back). Overlock the seam allowances and press them towards the center back. Stitch on the Lower Back. Overlock the seam allowance and press it upwards.
  3. Stitch the princess seams of the front (Center Front to Side Front). Overlock the seam allowances and press them towards the center. Stitch on the Lower Front. Overlock the seam allowance and press it upwards.
  4. Stitch the shoulder seams and the right side seam, press the seam allowances towards the back and overlock. Overlock the left side seam allowances separately. Stitch the left side seam from the seam joining the upper and lower front parts down to the hem. Press the seam allowance open. Insert the invisible zipper above it.
  5. Stitch the center back seam of the collar. Press the seam allowance open. Stitch the grown-on collar to the back neckline, clipping the collar seam allowance at the corner. Stitch the collar seam on the Front Neckline Facing. Press the seam allowance open. Clip the facing seam allowance at the marks. Overlock the outer edge of the facing from mark to mark. Place the facing on the neckline and collar, right sides together, and stitch all around. Trim the seam allowances at the corners and turn the facing to the wrong side.
  6. Turn under the seam allowance of the inner collar and topstitch it along the outer collar attachment seam.
  7. Set the sleeves into the armholes. Overlock the seam allowances.
  8. Cut (if you don't have ready-made) a bias strip 4 cm wide and as long as the armhole with the sleeve + 5 cm. Fold the bias strip in half lengthwise, wrong sides together, and press. Place the binding on the right side along the armhole edge and the sleeve hem and stitch. Clip the seam allowances. Turn the binding to the wrong side and topstitch along the fold onto the dress. Press the seam.
  9. Overlock the lower edge of the dress, press it to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?