Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4438
#4440

Fitted Button-Front Lace Blouse

Pattern #4439

A women's fitted hip-length blouse in lace, with a stand collar open at the centre front, a full-length button front on separate bands, darts front and back, and short sleeves drawn in by elastic at the hem. Drafted to your own measurements. Recommended fabric: lace fabric of natural or blended fibres.

Tech. Description

Fitted Button-Front Lace Blouse

A women's fitted hip-length blouse in lace, with a stand collar open at the centre front, a full-length button front on separate bands, darts front and back, and short sleeves drawn in by elastic at the hem.

When To Wear

  • In summer for the office, tucked into or worn over a pencil skirt or straight trousers.
  • For evenings and celebrations, worn over a camisole in a matching or contrasting colour.

Key Design Features

Silhouette: Close-fitting, shaped by bust and waist darts on the fronts and by shoulder and waist darts on the back.

Length: Hip length, straight hem turned up twice by 1 cm and topstitched.

Collar: Stand collar made as a two-layer interfaced neck facing, stitched around its outer edge, turned and set into the neckline; its ends stop short of the centre front, leaving a small V opening.

Sleeves: Short set-in sleeves; elastic 0.5 cm wide is caught under the overlock between notches on the hem, so the hem gathers when stitched.

Closure: Button front on separate folded, interfaced bands; buttonholes on the right front, buttons on the left.

Back: Centre back seam, plus shoulder and waist darts.

Finishing: Shoulder and side seams overlocked and pressed towards the back.

Level Of Difficulty

Intermediate. Darts and buttonholes in lace, applied button bands, a stand collar set in two stages and elastic stitched into the sleeve hem under tension.

Fabric Recommendations

Lace fabric of natural or blended fibres.

Additional Supplies

  • Fusible interfacing (collar, button bands)
  • Elastic, 0.5 cm wide
  • 6 buttons

Cutter's Must

From main fabric:

  • Back - 2 pieces
  • Front - 2 pieces
  • Sleeve – 2 pieces
  • Neck facing – 2 pieces
  • Trim strip — 4 pieces

From fusible interfacing:

  • Neck facing – 1 piece
  • Trim strip – 2 pieces

Sewing Instructions

  1. Fuse fusible interfacing to the respective pieces.
  2. Place the neck facing pieces right sides together and stitch along the outer contour. Start and end the stitching strictly at the marked seam line for attachment. Clip seam allowances at curves. Turn the finished facing right side out and press.
  3. Stitch the waist, shoulder, and bust darts on the back and front. Press the depths of the shoulder and waist darts towards the center of the respective pieces, and the depths of the bust darts upwards. Stitch the center back seam of the back, press seam allowances to the left side and serge.
  4. Stitch the side and shoulder seams, press seam allowances towards the back and serge.
  5. Fold the trim strip pieces in pairs and stitch the outer edge. Turn the pieces right side out and press. Attach the outer trim strip to the front, fold the seam allowance of the inner trim strip inwards and topstitch.
  6. Attach the upper facing to the neckline, turn under the raw edge of the lower facing and topstitch into the seam of the upper facing attachment.
  7. Stitch and serge the sleeve seam. Serge the lower edge of the sleeve, inserting elastic under the serger stitch between the notches. Fold the sleeve hem allowance inwards and topstitch, stretching the elastic. Set the sleeves into the armholes. Press and serge the seam allowances.
  8. Turn up the hem of the garment twice to the wrong side by 1 cm and topstitch.
  9. On the right front, make buttonholes; on the left, sew on buttons.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?