Pleated Front Coat With Stand Collar
A women's lined coat of mid-thigh length with an edge-to-edge front, a stand collar cut in one with the coat, and a front divided by curved seams into three parts. The pleated middle part carries a fabric bow sewn into the right front edge.
When To Wear
- In spring and autumn over dresses and slim skirts or trousers.
- For daytime events and work, worn closed with the hooks and the bow.
Key Design Features
Silhouette: Semi-fitted, shaped by back panel seams and the curved front seams.
Length: Mid-thigh.
Collar: Stand collar cut in one with the fronts and back, sewn together with the shoulder seams; it stands open at the centre front with a notch where it meets the front edge.
Sleeves: Long two-piece set-in sleeves with elbow and front seams.
Front: Edge-to-edge, closed with two decorative hooks and loops set into the front edge seam. Each front is cut in three parts: an upper part, a middle part with pleats, and a lower part, joined by curved seams.
Front details: A folded bow with loose pleats is caught in the right front edge and fastened to the middle front with two hidden snaps. A narrow band with a topstitched loop strip is stitched over the pleated middle part.
Back: Centre back seam, panel seams from the armholes and shoulder darts.
Finishing: Front facings and back neck facing; shoulder pads; front parts, facings, back armholes and hems interfaced.
Lining: Full lining, including the sleeves, cut from the coat pieces less the facings.
Level Of Difficulty
Intermediate. Curved panel seams, pleats, a grown-on stand collar sewn with the shoulder seams, two-piece sleeves, a bagged full lining.
Fabric Recommendations
Suiting fabrics of natural or blended fibres.
Additional Supplies
- Lining fabric
- Fusible interfacing
- 2 decorative hooks with loops
- 2 snaps
- Shoulder pads
Cutter's Must
From main fabric:
- Back Center – 2 pieces
- Back Side – 2 pieces
- Front Upper – 2 pieces
- Front Middle – 2 pieces
- Front Lower – 2 pieces
- Sleeve Upper – 2 pieces
- Sleeve Lower – 2 pieces
- Back neck facing – 2 pieces
- Front Facing – 2 pieces
- Bow — 1 piece
- Bridge — 1 piece
- Loop — 1 piece
From lining fabric:
- Back Center – 2 pieces
- Back Side – 2 pieces
- Front Upper – 2 pieces
- Front Middle – 2 pieces
- Front Lower – 2 pieces
- Sleeve Upper – 2 pieces
- Sleeve Lower – 2 pieces
From fusible interfacing:
- Front Upper – 2 pieces
- Front Middle – 2 pieces
- Front Lower – 2 pieces
- Front Facing — 2 pieces
- Back neck facing — 2 pieces
Also, duplicate the back armhole seam allowances, the garment hem, and the sleeve hem.
Sewing Instructions
- Fuse fusible interfacing to the pattern pieces.
- Stitch the shoulder darts on the back. Press the fullness towards the center. Stitch the back panel seams, press seam allowances open. Stitch the center back seam. Press the seam allowance open.
- Stitch the upper and middle front PANELs, press seam allowances upwards. Stitch the lower and middle front PANELs, press seam allowances open. Form and secure the pleats on the middle front.
- Stitch the coat shoulder seams simultaneously with the integrated stand collar seam. Clip and press seam allowances open.
- Stitch the side seams. Press seam allowances open.
- Stitch the center seam of the back neck facing. Stitch the shoulder seams of the front facings and facing, simultaneously with the stand collar seam. Press seam allowances open.
- Fold the Bow in half lengthwise and stitch along the two short sides. Trim seam allowances at the corners and turn right side out. Form and secure arbitrary pleats.
- Press up the hem allowance. Place the front facing onto the right side of the front, right side down, and stitch around the front edges and the stand collar edge, inserting the bow detail (on the right front), hooks, and loops according to markings. Stitch the lower edge of the front facing to the front precisely along the marked hemline, stopping 1.5 cm before the inner edge of the front facing. Clip seam allowances at the corners, turn the front edges and stand collar right side out, and smooth the seams.
- Stitch and press open the sleeve elbow seam. Press up the sleeve hem. Stitch and press open the sleeve front seam. Set the sleeve into the armhole. Attach shoulder pads.
- On the lining fabric pattern pieces, stitch the seams, leaving an opening in the left side seam for turning. Set in the sleeves. Stitch the lining to the front facings and facing.
- Stitch the lining to the garment hem and sleeve hem. Turn the coat right side out through the opening. Close the opening.
- Fold the Bridge in half lengthwise, right sides together, and stitch along the long side. Turn the piece right side out, smooth it, centering the seam.
- On the Loop piece, overlock one longitudinal edge. Press the unoverlock edge inwards, covering it with the overlock edge. Topstitch along the edge.
- Place the Loop onto the Bridge, overlock the open edges. Press the overlock edges to the wrong side, place the detail onto the front and topstitch, overlapping the seams where the middle front was attached.
- Sew snap fasteners onto the bow, and sew the corresponding parts onto the middle front.