Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4415
#4417

Pleated Bodice Cap Sleeve Dress

Pattern #4416

A women's knee-length dress with cap sleeves, a waist seam and a flared skirt. The asymmetric front bodice has pleats running towards the left side, where a flounce set into the side seam hangs over the skirt and is held by a decorative flower. Drafted to your own measurements. Recommended fabric: double-faced dress fabrics made from natural or blended fibres: both sides of the flounce are visible.

Tech. Description

Pleated Bodice Cap Sleeve Dress

A women's knee-length dress with cap sleeves, a waist seam and a flared skirt. The asymmetric front bodice has pleats running towards the left side, where a flounce set into the side seam hangs over the skirt and is held by a decorative flower.

When To Wear

  • As a wedding guest or at family celebrations in spring and summer.
  • For daytime receptions and dinners, with heels and a light jacket or wrap.

Key Design Features

Silhouette: Fitted bodice with a waist seam and a skirt that flares towards the hem.

Length: About knee length.

Neckline: Wide rounded neckline finished with an interfaced front and back facing.

Sleeves: Short cap sleeves with hems turned in and topstitched; the lower part of the armhole is finished with a self-made bias binding 4 cm wide, folded in half.

Front: Asymmetric upper front with one princess seam joining the upper front to the upper side front; pleats folded and secured with the depths turned downwards before the bodice is joined to the lower front, which is cut on the fold.

Back: Princess seams on the upper back, a seam joining the upper and lower back, and a centre back seam.

Closure: Invisible zipper in the centre back seam.

Finishing: A single flounce, edges turned and topstitched, is inserted into the left side seam, folded into two pleats and slipstitched to the dress; a decorative flower is sewn over the point of attachment. Hem pressed up and topstitched.

Level Of Difficulty

Intermediate. An asymmetric pleated bodice, a flounce caught into the side seam, an invisible zipper and bias-bound armholes.

Fabric Recommendations

Double-faced dress fabrics made from natural or blended fibres: both sides of the flounce are visible.

Additional Supplies

  • Fusible interfacing (front and back neckline facings)
  • Invisible zipper
  • Decorative flower
  • Bias binding, if not cut from the dress fabric

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm; dress hem and sleeve hem allowance 1.2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). The labels on the pattern pieces are written on the right side of the fabric!

From main fabric:

  • Upper Center Back – 2 pieces
  • Upper Side Back – 2 pieces
  • Lower Back – 2 pieces
  • Upper Front – 1 piece
  • Upper Side Front – 1 piece
  • Lower Front – 1 piece on fold
  • Sleeve – 2 pieces
  • Flounce – 1 piece
  • Back Neckline Facing – 2 pieces
  • Front Neckline Facing – 1 piece

From fusible interfacing:

  • Front Neckline Facing – 1 piece
  • Back Neckline Facing – 2 pieces

Sewing Instructions

  1. Fuse interfacing to the neckline facings.
  2. Stitch the princess seams of the upper back (Upper Center Back to Upper Side Back). Overlock the seam allowances and press them towards the center. Stitch the upper back to the Lower Back. Overlock the seam allowance and press it downwards. Overlock the center back edges separately. Stitch the center back seam from the zipper mark to the lower edge and press the seam allowances open. Insert the invisible zipper.
  3. Stitch the princess seam of the front (Upper Front to Upper Side Front). Overlock the seam allowance and press it towards the center. Fold and secure the pleats (pleat depths directed downwards). Stitch the upper front to the Lower Front, overlock the seam allowance and press it upwards.
  4. Overlock the outer edges of the Flounce, press them to the wrong side and topstitch.
  5. Stitch the shoulder seams, press the seam allowances towards the back and overlock. Stitch the side seams, inserting the Flounce into the left side seam, press the seam allowances towards the back and overlock.
  6. Stitch the shoulder seams of the Front Neckline Facing and Back Neckline Facings and press the allowances open. Overlock the outer edge. Place the facing on the neckline right sides together and stitch. Clip the seam allowances, turn the facing to the wrong side and press. Attach the facing to the zipper tape and to the shoulder seams.
  7. Overlock the lower edge of the Sleeve, fold it inwards and topstitch. Set the sleeve into the armhole. Overlock the seam allowance. Cut (if you don't have ready-made) a bias strip 4 cm wide and as long as the lower part of the armhole + 5 cm. Fold the bias strip in half lengthwise, wrong sides together, and press. Place the binding on the right side along the armhole edge and stitch. Clip the seam allowances. Turn the binding to the wrong side and topstitch along the fold onto the dress. Press the seam.
  8. Overlock the lower edge of the dress, press it to the wrong side and topstitch.
  9. Fold two pleats on the Flounce and slipstitch the flounce to the dress. Sew the decorative flower over the attachment point.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?