Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4413
#4415

Fitted Collared Dress with Flounces and Sleeves

Pattern #4414

A fitted women's dress with a seam under the bust, a two-part flat collar and a flounce at the hem, both cut from contrast fabric. Short cap sleeves gathered at the cap, decorative buttons along a curved front seam and on the collar. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres, plus a fabric in a contrasting colour for the collar and flounces.

Tech. Description

Fitted Collared Dress with Flounces and Sleeves

A fitted women's dress with a seam under the bust, a two-part flat collar and a flounce at the hem, both cut from contrast fabric. Short cap sleeves gathered at the cap, decorative buttons along a curved front seam and on the collar.

When To Wear

  • At the office and at business meetings in spring and summer, or under a cropped jacket in cooler weather.
  • For daytime events, lunches and family celebrations, with heels.

Key Design Features

Silhouette: Close-fitting through the bodice and hips, shaped by darts and curved seams, with a flounce flaring at the hem.

Length: Just below the knee, including the flounce.

Collar: Flat collar in two parts, right and left, overlapping at one side of the neckline and trimmed with two buttons; interfaced, with the under layer turned in and topstitched along the attachment seam.

Sleeves: Short cap sleeves gathered along the cap, hems turned in and topstitched; the lower part of the armhole is finished with a self-made bias binding 4 cm wide, folded in half.

Front: One-piece upper front with darts, joined under the bust to a lower front cut in three pieces (centre, left and right). One curved seam runs down to the flounce and is trimmed with a row of buttons.

Back: Upper and lower back joined by a horizontal seam, darts on both sections, and a centre back seam.

Closure: Invisible zipper in the centre back seam.

Skirt: Front and back flounces in contrast fabric are attached to the lower edge; their hems are serged, pressed up and topstitched.

Level Of Difficulty

Intermediate. Curved panel seams, a two-part collar, flounces joined to a fitted skirt, an invisible zipper and gathered cap sleeves with bias-bound armholes.

Fabric Recommendations

Dress fabrics made from natural or blended fibres, plus a fabric in a contrasting colour for the collar and flounces.

Additional Supplies

  • Invisible zipper
  • 9 buttons (decorative)
  • Fusible interfacing (one layer of each collar part)
  • Bias binding, if not cut from the dress fabric

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm; sleeve hem allowance 1.5 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).

From main fabric:

  • Upper Back – 2 pieces
  • Lower Back – 2 pieces
  • Upper Front – 1 piece
  • Lower Center Front – 1 piece
  • Lower Left Front – 1 piece
  • Lower Right Front – 1 piece
  • Sleeve – 2 pieces

From contrast fabric (main fabric 2):

  • Back Trimming – 1 piece
  • Front Trimming – 1 piece
  • Right Collar – 2 pieces
  • Left Collar – 2 pieces

From fusible interfacing:

  • Right Collar – 1 piece
  • Left Collar – 1 piece

Sewing Instructions

  1. Fuse interfacing to one Right Collar and one Left Collar piece.
  2. Stitch the darts on the Upper Back and Lower Back pieces and press them towards the center. Stitch the Upper Back to the Lower Back. Overlock the seam allowance and press it downwards. Overlock the center back edges separately. Stitch the center back seam from the zipper mark to the lower edge and press the seam allowances open. Insert the invisible zipper.
  3. Stitch the darts on the Upper Front. Press the dart depths towards the center.
  4. Stitch the princess seams of the front (Lower Center Front, Lower Left Front and Lower Right Front). Overlock the seam allowances and press them towards the center.
  5. Stitch the flounces (Front Trimming and Back Trimming) to the front and back respectively. Overlock the seam allowances and press them upwards.
  6. Stitch the side and shoulder seams. Overlock the seam allowances and press them towards the back.
  7. Place the Right Collar pieces right sides together and stitch along the outer edge; repeat with the Left Collar. Notch the seam allowances, turn the collars right side out and press. Clip the neckline seam allowance at the mark. Stitch the outer layer of the collar to the neckline. Turn under the seam allowance of the inner layer and topstitch it along the collar attachment seam.
  8. Overlock the lower edge of the Sleeve, fold it inwards and topstitch. Sew a line of loose-tension stitching along the sleeve cap and gather. Set the sleeve into the armhole. Overlock the seam allowance. Cut (if you don't have ready-made) a bias strip 4 cm wide and as long as the lower part of the armhole + 5 cm. Fold the bias strip in half lengthwise, wrong sides together, and press. Place the binding on the right side along the armhole edge and stitch. Clip the seam allowances. Turn the binding to the wrong side and topstitch along the fold onto the dress. Press the seam.
  9. Overlock the lower edge of the flounces, press it to the wrong side and topstitch. Sew on the decorative buttons.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?