Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4412
#4414

Fitted Knit Dress Cuffed Sleeves Pockets

Pattern #4413

A knee-length women's dress for knit fabric with a raised waist seam, a pleated upper front, slanted pockets in the lower front and three-quarter sleeves gathered into cuffs. A tie band crosses the front at the waist seam and ties at the back. Drafted to your own measurements. Recommended fabric: medium-stretch knit fabric of natural or blended fibres.

Tech. Description

Fitted Knit Dress Cuffed Sleeves Pockets

A knee-length women's dress for knit fabric with a raised waist seam, a pleated upper front, slanted pockets in the lower front and three-quarter sleeves gathered into cuffs. A tie band crosses the front at the waist seam and ties at the back.

When To Wear

  • For work and daytime wear in autumn, winter and spring, with tights and closed shoes.
  • Under a jacket or cardigan.

Key Design Features

Silhouette: Close-fitting straight dress with a raised waist seam just under the bust.

Length: To the knee.

Neckline: High, wide round neckline finished with a folded bias binding topstitched along the fold.

Sleeves: Set-in three-quarter sleeves, gathered at the lower edge into a folded cuff.

Front: Upper front cut in one piece with pleats turned towards the side seams; lower front cut in one piece.

Pockets: Slanted pockets in the lower front, running from the waist seam to the side seams, with pocket bags and pocket sides.

Back: Centre back seam, a horizontal seam at waist level and darts on the back pieces.

Waist: A folded tie band sits on the front, its lower edge overlapping the waist seam by 1 cm; it is caught in the side seams and its ends tie in a bow at the back.

Finishing: Seams sewn with a stretch or narrow zigzag stitch or on a 3- or 4-thread overlocker; hem turned up 2 cm and topstitched with a twin needle.

Level Of Difficulty

Intermediate. Sewing knit fabric, front pleats, slanted pockets, a bias-bound neckline, gathered sleeves set into cuffs.

Fabric Recommendations

Medium-stretch knit fabric of natural or blended fibres.

Additional Supplies

  • Bias binding 4 cm wide, the length of the neckline plus 5 cm (or cut from the main fabric)
  • Twin needle for the hem

Cutter's Must

  • Upper Back – 2 pieces
  • Lower Back – 2 pieces
  • Upper Front – 1 piece
  • Lower Front – 1 piece
  • Waistband – 1 piece
  • Sleeve – 2 pieces
  • Cuff – 2 pieces
  • Pocket Side – 2 pieces
  • Pocket Bag – 2 pieces

Tip: Cut pieces from knit fabrics are sewn with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity. You can also sew pieces directly on a 3- or 4-thread overlock machine.

Sewing Instructions

  1. Stitch the darts on the Upper Back and Lower Back pieces, trim the dart allowances with the overlocker. Stitch the Upper Back to the Lower Back. Serge the seam allowance. Stitch the center back seam. Serge the seam allowance and press it to the left.
  2. Fold the pleats on the Upper Front (pleat depths turned towards the side seams) and baste them along the lower edge.
  3. Place a Pocket Bag on the Lower Front, right sides together, and stitch along the pocket opening. Turn the Pocket Bag to the wrong side and press. Place the Lower Front on the Pocket Side and stitch the outer edges of the Pocket Bag and Pocket Side together. Serge the seam allowance. Stitch the Upper Front to the Lower Front. Serge the seam allowance and press it downwards.
  4. Stitch the right shoulder seam. Press the seam allowance towards the back and serge. Cut (if no ready-made binding is used) a bias strip 4 cm wide and as long as the neckline plus 5 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the binding on the right side of the neckline, raw edges together, and stitch. Clip the seam allowances. Fold the binding to the wrong side and topstitch along the fold onto the dress. Press the seam. Stitch and serge the left shoulder seam.
  5. Stitch the side seams. Serge the seam allowances and press them towards the back.
  6. Stitch the Sleeve seams. Press and serge the seam allowances. Set the Sleeves into the armholes, matching the notches and easing the sleeve cap. Press and serge the seam allowances. Sew a row of long stitches along the lower edge of each Sleeve and pull up the gathers.
  7. Stitch each Cuff into a ring. Turn right side out and fold in half lengthwise. Slip the Cuff into the Sleeve and sew it to the lower edge. Serge the seam allowances.
  8. Serge the lower edge of the dress. Press the hem allowance to the wrong side and topstitch.
  9. Fold the Waistband in half lengthwise and stitch around the edges, leaving a small opening. Trim the corners, turn the Waistband right side out and sew the opening closed. Place the Waistband on the front, matching the centers, and catch it in the side seams so that its lower edge overlaps the seam joining the Upper Front and Lower Front by 1 cm.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Additional options

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?