Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4411
#4413

Knit Tunic Dress with Collar

Pattern #4412

A short women's tunic dress for knit fabric, with sleeves cut in one with a curved yoke, centre front and centre back seams, a deep band at the hem and a folded stand-up collar. Drafted to your own measurements. Recommended fabric: knit fabric with low to medium stretch, made from natural or blended fibres.

Tech. Description

Knit Tunic Dress with Collar

A short women's tunic dress for knit fabric, with sleeves cut in one with a curved yoke, centre front and centre back seams, a deep band at the hem and a folded stand-up collar.

When To Wear

  • In autumn and winter with tights or leggings and boots.
  • Everyday and office wear, on its own or under a coat.

Key Design Features

Silhouette: Straight and loose through the body, ending in a separate band at the hips.

Length: Short, above the knee.

Collar: Folded stand-up collar sewn into a ring, with its seam at the left shoulder.

Sleeves: Three-quarter sleeves in two parts (front and back) joined by a seam along the top of the arm; each part extends into a curved yoke on the front and back. Underarm and side seams are sewn in one.

Front: Bust darts and a centre front seam.

Back: Centre back seam.

Waist: Separate lower front and lower back form a band at the hips.

Finishing: Hems of the dress and sleeves turned up and hand-stitched with blind stitches.

Level Of Difficulty

Beginner. Few pieces and straight assembly on an overlocker or with a stretch stitch; the curved yoke seams need care.

Fabric Recommendations

Knit fabric with low to medium stretch, made from natural or blended fibres.

Additional Supplies

  • None besides fabric and thread.

Cutter's Must

  • 1. Back – 2 pieces
  • 2. Lower Back – 1 piece
  • 3. Front – 2 pieces
  • 4. Lower Front – 1 piece
  • 5. Back Sleeve – 2 pieces
  • 6. Front Sleeve – 2 pieces
  • 7. Collar – 1 piece

Tip: Cut pieces from knit fabrics are sewn with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity. You can also sew pieces directly on a 3- or 4-thread overlock machine.

Sewing Instructions

  1. Stitch the bust darts on the Front pieces. Trim the dart excess with the overlocker and press.
  2. Join the Back Sleeves to the Back pieces, press and serge the seam allowances. Stitch the center back seam, press and serge the seam allowances. Join the Lower Back to the back, press and serge the seam allowances.
  3. Join the Front Sleeves to the Front pieces, press and serge the seam allowances. Stitch the center front seam, press and serge the seam allowances. Join the Lower Front to the front, press and serge the seam allowances.
  4. Stitch the upper sleeve seam (Front Sleeve to Back Sleeve), press and serge the seam allowances. Stitch the underarm sleeve seams and the side seams in one continuous seam. Press and serge the seam allowances.
  5. Stitch the Collar into a ring. Press the Collar in half lengthwise with the right side out and sew it into the neckline of the back and front, placing the Collar seam at the left shoulder seam. Press and serge the seam allowances.
  6. Serge the bottom edges of the dress and the sleeves, press them to the wrong side and hem with blind stitches.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Additional options

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?