Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4405
#4408

Long Sleeve Bow Neckline Blouse

Pattern #4406

A women's long-sleeve blouse with princess seams front and back, a buttoned front, and a double front yoke whose cut-on collar extends into long ends tied in a bow at the V-neckline. Drafted to your own measurements. Recommended fabric: fine blouse fabrics; silk made from natural or blended fibres.

Tech. Description

Long Sleeve Bow Neckline Blouse

A women's long-sleeve blouse with princess seams front and back, a buttoned front, and a double front yoke whose cut-on collar extends into long ends tied in a bow at the V-neckline.

When To Wear

  • At the office with a pencil skirt or trousers, or under a jacket.
  • For daytime events and dinners in spring and autumn.

Key Design Features

Silhouette: Fitted through princess seams on the front and back, hip length.

Collar: Cut in one with the front yokes, joined at the centre back and continuing into tie ends that form a bow at the V-neckline.

Front: Doubled yoke above the bust, laid over the fronts and caught in the princess and shoulder seams; centre front opening with separate facings and a button closure.

Sleeves: Long set-in sleeves with a gathered cap, a slit at the wrist topstitched 0.2 cm from the fold, and soft pleats into a buttoned cuff.

Back: Centre back seam and princess seams.

Finishing: Interfaced facings and cuffs; hem turned up and topstitched.

Level Of Difficulty

Intermediate. Fine fabric, a lined yoke with cut-on collar and bow, princess seams, gathered sleeve caps, cuff slits and buttonholes.

Fabric Recommendations

Fine blouse fabrics; silk made from natural or blended fibres.

Additional Supplies

  • Fusible interfacing (facings, cuffs)
  • 10 buttons

Cutter's Must

From main fabric:

  • 1. Center back – 2 pieces
  • 2. Side back – 2 pieces
  • 3. Center front – 2 pieces
  • 4. Side front – 2 pieces
  • 5. Sleeve – 2 pieces
  • 6. Cuff – 2 pieces
  • 7. Front facing – 2 pieces
  • 8. Front yoke – 4 pieces

From fusible interfacing:

  • Facings, cuffs.

Sewing Instructions

  1. Fuse fusible interfacing to the designated pieces.
  2. Stitch the princess seams on the back pieces. Finish seam allowances and press towards the center. Stitch the center back seam. Finish the seam allowance and press to the left side.
  3. Finish the outer edge of the facing. Place the facing on the front, right sides together, and stitch along the center front seam and neckline edge. Trim the seam allowance and turn to the wrong side.
  4. Stitch the center seams of the collars on the yokes. Press seam allowances open. Place the yokes, right sides together, and stitch along the bottom edge, bow, and neckline. Clip the seam allowances at the corners and turn to the right side. Place the yoke on the front and secure along the princess and shoulder seams.
  5. Stitch the princess seams of the front. Finish seam allowances and press towards the center.
  6. Clip the seam allowance at the corner of the one-piece collar. Stitch the shoulder seams. Press seam allowances towards the back. Attach the one-piece collar. Finish the shoulder seam allowances and the collar attachment seam allowance simultaneously.
  7. Stitch the side seams. Finish seam allowances and press towards the back.
  8. Finish the sleeve edges. Stitch the seam up to the notch for the slit. Press seam allowances open. Topstitch the slit 0.2 cm from the fold. Fold the cuff in half lengthwise and stitch the two short sides, stitching the corner up to the mark. Clip the seam allowance at the mark. Turn the cuff to the right side and press. Attach the upper cuff to the sleeve, creating arbitrary pleats. Fold under the seam allowance of the inner cuff and topstitch into the attachment seam of the upper side.
  9. Along the sleeve cap, stitch with a loosely tensioned thread and gather. Set the sleeve into the armhole. Finish seam allowances.
  10. Finish the hem seam allowance, press to the wrong side, and topstitch. Finish buttonholes and sew on buttons.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?