Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4406
#4409

Contrast V-Neck Shift Dress with Split Cuffs

Pattern #4408

A knee-length women's shift dress for medium-stretch knit fabric, with a V-neckline framed by a notched collar and lapels and three-quarter sleeves with split cuffs. Collar, lapels and cuffs are cut from a contrasting woven dress fabric. Drafted to your own measurements. Recommended fabric: medium-stretch knit fabric made from natural or blended fibres for the dress; a contrasting woven dress fabric made from natural or blended fibres for the collar, lapels and cuffs.

Tech. Description

V-Neck Shift Dress with Contrast Cuffs

A knee-length women's shift dress for medium-stretch knit fabric, with a V-neckline framed by a notched collar and lapels and three-quarter sleeves with split cuffs. Collar, lapels and cuffs are cut from a contrasting woven dress fabric.

When To Wear

  • At the office in autumn, winter and spring, with tights and low heels or ankle boots.
  • For everyday wear and travel: a pull-on knit dress without a zipper or buttons.

Key Design Features

Silhouette: Straight shift shape, close to the body, with bust darts.

Length: About knee length.

Collar: V-neckline with a notched collar set between two-layer lapels; collar and lapels are interfaced, and the neckline seam allowances are topstitched onto the dress 0.5 cm from the seam.

Sleeves: Three-quarter length, set into an open armhole and closed in one seam with the side seams. Folded cuffs with overlapping ends that leave a split, topstitched 0.5 cm from the seam.

Front: One piece cut on the fold, with bust darts; no closure.

Back: Two pieces with a centre back seam.

Finishing: Knit seams stitched with a stretch or narrow zigzag stitch, or on a 3- or 4-thread overlocker; hem turned up and topstitched, with a twin needle to keep it elastic.

Level Of Difficulty

Intermediate. Sewing knit fabric together with an interfaced woven collar and lapels; the notched collar is caught between the lapel layers along the gorge line.

Fabric Recommendations

Medium-stretch knit fabric made from natural or blended fibres for the dress; a contrasting woven dress fabric made from natural or blended fibres for the collar, lapels and cuffs.

Additional Supplies

  • Fusible interfacing (collar, lapels, cuffs)
  • Twin needle for the hem

Cutter's Must

From knit fabric:

  • Back – 2 pieces
  • Front – 1 piece (on fold)
  • Sleeve – 2 pieces

From contrast dress fabric:

  • Collar – 2 pieces
  • Lapel – 4 pieces
  • Cuff – 2 pieces

From fusible interfacing:

  • Collar – 1 piece
  • Lapel – 2 pieces
  • Cuff – 2 pieces

Tip: Pattern pieces made from knit fabrics should be stitched with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity. Alternatively, pieces can be stitched directly on a 3- or 4-thread overlocker.

Sewing Instructions

  1. Fuse interfacing to one Collar piece, two Lapel pieces and both Cuff pieces.
  2. Stitch the center back seam, press seam allowances to the left side and finish (serge/overlock).
  3. Stitch the bust darts, trim excess fabric with an overlocker.
  4. Stitch the shoulder seams, press seam allowances towards the back and finish (serge/overlock).
  5. Place the Collar pieces right sides together and stitch along the ends and outer edge. Clip the seam allowances at the marks, turn the collar right side out and press. Place the Lapel pieces right sides together in pairs, insert the collar between them and stitch along the gorge line, at the same time stitching the outer edge of the lapel. Turn the lapel right side out, shape, and press.
  6. Attach the collar with lapels to the neckline, finish seam allowances. Topstitch the seam allowances to the main garment with a 0.5 cm seam.
  7. Set the sleeve into the open armhole, press seam allowances and finish (serge/overlock).
  8. Stitch the sleeve seams simultaneously with the side seams, press seam allowances towards the back and finish (serge/overlock).
  9. Fold the cuff in half lengthwise right sides together and stitch the short sides. Turn the cuff right side out, shape, and press.
  10. Overlap the cuff ends, aligning marks. Attach the cuff to the lower edge of the sleeve, press seam allowances towards the sleeve, finish (serge/overlock). Topstitch the seam allowances to the main garment with a 0.5 cm seam.
  11. Finish (serge/overlock) the garment hem, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Additional options

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?