CUTTER'S MUST
- From main fabric:
- 1. Center FRONT PANEL - 1 QTY on fold
- 2. Side FRONT PANEL - 2 QTY
- 3. Center BACK PANEL – 2 QTY
- 4. Side BACK PANEL - 2 QTY
- 5. SLEEVE - 2 QTY
Sewing Instructions
- Stitch the princess seams on the FRONT PANEL and BACK PANEL. Overcast the SEAM ALLOWANCES and press them towards the center of the FRONT PANEL and BACK PANEL respectively.
- On the left center BACK PANEL, cut 5 cm along the vertical slit edge. On both center BACK PANEL pieces, fuse the slit from the wrong side. On the right side, mark the center seam line (slit fold line). Press the left part along the slit fold line; on the right part, press only the right slit SEAM ALLOWANCE (6 cm) to the wrong side. Align the pieces along the center seam and secure them at the top edge of the slit. Overcast the center BACK PANEL edge separately on each piece, simultaneously overcasting the slit. Stitch the center BACK PANEL edge from the ZIPPER NOTCH to the edge of the slit. Clip the corner of the slit SEAM ALLOWANCE on the right part. Press open the center seam SEAM ALLOWANCES, press the slit SEAM ALLOWANCES and secure them with machine stitching. Insert the ZIPPER from the top edge to the NOTCH.
- Stitch the side and shoulder edges. Press the SEAM ALLOWANCES towards the BACK PANEL and overcast.
- Cut a BIAS BINDING 4 cm wide and equal to the length of the neckline. Fold the BIAS BINDING in half lengthwise, right side out, and press. Align the TRIM STRIP with the neckline edge on the right side and stitch, then fold the TRIM STRIP to the wrong side, clip the SEAM ALLOWANCES and topstitch along the fold to the main piece. Press the seam. Hand-stitch the TRIM STRIP allowance to the ZIPPER.
- Stitch the SLEEVE edge. Press the seam and overcast. Set the SLEEVE into the armhole, matching the NOTCHES. Press the seam and overcast.
- Press the hem allowance of the dress and SLEEVE to the wrong side, overcast, and hem with blind stitches.
