Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4404
#4406

Fitted Guipure Collared Dress with Pleats

Pattern #4405

A fitted knee-length women's dress with a lined guipure upper bodice and stand collar, a pleated crossover band at the high waist and a pleated lower front. Sleeveless, with an invisible zipper and a slit in the centre back seam. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres for the lower parts and the crossover band; guipure for the upper bodice and stand collar.

Tech. Description

Fitted Guipure Collared Dress with Pleats

A fitted knee-length women's dress with a lined guipure upper bodice and stand collar, a pleated crossover band at the high waist and a pleated lower front. Sleeveless, with an invisible zipper and a slit in the centre back seam.

When To Wear

  • For evening events, dinners and family celebrations, with heels.
  • As a wedding guest or at a theatre visit; in cooler weather under a short jacket.

Key Design Features

Silhouette: Close-fitting sheath with a seam at the high waist, shaped by darts on the upper and lower back and on the upper front.

Length: About knee length.

Collar: Stand collar in guipure, lined with interfaced lining fabric.

Sleeves: Sleeveless, with the shoulders extending slightly over the top of the arm; armholes finished with the lining.

Front: Guipure upper front with darts. Two middle front pieces, each pleated and lined, cross over the front at the high waist and are caught into the side seams. The lower front in main fabric has pleats folded at the seam.

Back: Guipure upper back and main-fabric lower back, both with darts, and a centre back seam.

Closure: Invisible zipper in the centre back seam.

Skirt: Slit at the centre back hem, its edges topstitched 0.1 cm from the fold; hem slipstitched by hand.

Lining: The guipure upper bodice and stand collar are lined with lining fabric in the colour of the guipure; the lining is attached to the zipper tape and to the high-waist seam.

Level Of Difficulty

Intermediate. Working with guipure over a lining, a lined stand collar, pleated crossover bands, an invisible zipper and a back slit.

Fabric Recommendations

Dress fabrics made from natural or blended fibres for the lower parts and the crossover band; guipure for the upper bodice and stand collar.

Additional Supplies

  • Lining fabric in the colour of the guipure
  • Invisible zipper
  • Fusible interfacing (lining stand collar)

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm; dress hem allowance 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).

From main fabric:

  • Lower Back – 2 pieces
  • Lower Front – 1 piece
  • Middle Front – 2 pieces

From guipure:

  • Upper Back – 2 pieces
  • Upper Front – 1 piece
  • Stand Collar – 1 piece

From lining fabric:

  • Upper Back – 2 pieces
  • Upper Front – 1 piece
  • Middle Front Lining – 2 pieces
  • Stand Collar – 1 piece

From fusible interfacing:

  • Stand Collar – 1 piece

Sewing Instructions

  1. Fuse interfacing to the lining Stand Collar.
  2. Stitch the darts on the Upper Back and Lower Back pieces, trim the dart depths to 1 cm, overlock and press towards the center back seam. Stitch the darts on the Upper Front and press the dart depths towards the center of the piece. Do the same on the lining pieces.
  3. Stitch the shoulder seams of the guipure pieces and press the allowances open. Stitch the shoulder seams of the lining pieces and press the allowances open. Overlock the lower edges of the lining. Stitch the guipure Stand Collar to the dress neckline, and the lining Stand Collar to the lining neckline.
  4. Stitch the Lower Back to the Upper Back, press the seam allowances upwards and overlock.
  5. Overlock the center back edges separately on each piece. Stitch the center back seam from the zipper mark to the slit mark. Press the center back seam allowances open, pressing the slit allowances as well. Insert the invisible zipper. Topstitch the sides of the slit 0.1 cm from the fold.
  6. Fold and secure the pleats on the Lower Front. Stitch the Lower Front to the Upper Front, press the seam allowances upwards and overlock.
  7. Fold and secure the pleats on the Middle Front pieces, place each one right sides together with its Middle Front Lining and stitch the upper and lower edges. Turn right side out, straighten and press. Lay the middle front pieces over the front and baste them along the side seams.
  8. Place the lining and the dress right sides together and stitch along the edge of the stand collar. Stitch the armholes in two stages – first the front, then the back. Clip the seam allowances at the curves, turn right side out and press. Tack the stand collar attachment allowances together.
  9. Stitch the side seams of the dress and lining in one continuous seam, press the seam allowances towards the back and overlock. Attach the lining to the zipper tape and to the seam allowances joining the lower parts of the dress to the upper parts.
  10. Overlock the hem allowance of the dress, press it to the wrong side, and slipstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?