Mid Thigh Length Asymmetric Hooded Coat
A women's mid-thigh coat with an off-centre button placket, a lined hood that continues into the front edges, princess seams front and back, pockets in the side fronts and two-piece set-in sleeves. Fully lined, worn with a separate tie belt.
When To Wear
- In autumn and spring, and on mild winter days, over knitwear with trousers or jeans.
- Belted over dresses and skirts.
Key Design Features
Silhouette: Semi-fitted, shaped by princess seams; can be belted at the waist.
Length: Mid-thigh.
Collar: No collar. A hood cut in four pieces (outer and inner) is set into the neckline; the front edges and the hood edge are stitched in one seam with the facings, so the hood folds open into a wide collar at the front.
Closure: Asymmetric front: a separate placket sewn to each centre front, topstitched 0.7 cm from the seam. Four buttons show on the outside; two inner buttons hold the underlap.
Pockets: Pockets with curved openings in the side front panels, faced with the lining-fabric pocket bags.
Sleeves: Two-piece set-in sleeves with shoulder pads and sleeve heads.
Back: Centre back seam and princess seams; the back side panels are cut in an upper and a lower part.
Waist: Separate self-fabric belt, tied at the front.
Lining: Full lining, bagged to the coat hem and sleeve hems; the coat is turned through an opening in the right sleeve lining.
Level Of Difficulty
Advanced. A two-layer hood sewn together with the front edges in one seam, an off-centre placket, pockets set into panel seams, set-in sleeves with shoulder pads and sleeve heads, and a fully bagged lining.
Fabric Recommendations
Coating fabrics.
Additional Supplies
- Lining fabric
- Fusible interfacing (centre fronts, front facings, back neck facing, coat and sleeve hems)
- 6 buttons
- Shoulder pads
- Sleeve heads
Cutter's Must
From main fabric:
- Center Back – 2 pieces
- Side Upper Back – 2 pieces
- Lower Side Back – 2 pieces
- Side Upper Front – 2 pieces
- Side Lower Front – 2 pieces
- Center Front – 2 pieces
- Front Side – 2 pieces
- Placket – 2 pieces
- Upper Sleeve – 2 pieces
- Lower Sleeve – 2 pieces
- Hood – 4 pieces
- Center Front Facing – 2 pieces
- Back Neckline Facing – 1 piece
- Waistband (tie belt) – 1 piece
From lining fabric:
- Center Back – 2 pieces
- Side Upper Back – 2 pieces
- Lower Side Back – 2 pieces
- Front Lining – 2 pieces
- Upper Sleeve – 2 pieces
- Lower Sleeve – 2 pieces
- Pocket Bag – 2 pieces
From fusible interfacing:
- Center Front – 2 pieces
- Center Front Facing – 2 pieces
- Back Neckline Facing – 1 piece
- Also the hem allowances of the coat and sleeves.
Sewing Instructions
- Fuse interfacing to the pieces listed above.
- Stitch the centre back seam (Center Back pieces) and press the seam allowances open. Stitch the Lower Side Back to the Side Upper Back and press the seam allowances open. Stitch the back princess seams and press the seam allowances towards the centre.
- Fuse interfacing to the allowance of the upper (pocket opening) edge of the Side Lower Front. Place the Pocket Bag on the right side of the Side Lower Front and stitch along the pocket opening. Turn the pocket bag to the wrong side and topstitch it to the seam allowances. Place the side front on the Front Side and baste them together along the edges. Stitch the edges of the pocket bag and overlock the seam allowances.
- Stitch the Side Upper Front to the Side Lower Front and press the seam allowances upwards. Stitch the Placket to the Center Front, press the seam allowances towards the placket and topstitch 0.7 cm from the seam. Stitch the front princess seams and press the seam allowances towards the centre.
- Stitch the shoulder and side seams of the coat and press the seam allowances open.
- Stitch the Back Neckline Facing to the Center Front Facings and press the seam allowances open.
- Stitch the Hood pieces together in pairs and press the seam allowances open. Stitch the outer hood to the coat neckline and the inner hood to the neckline of the facings; clip the seam allowances on the curves and press them open. Place the facings on the coat, right sides together, and stitch the front edges and the hood edge in one seam. Turn the coat right side out and press. Tack the hood seam allowances together close to the seams.
- Stitch the front sleeve seam (Upper Sleeve to Lower Sleeve) and press the seam allowances open. Stitch the elbow seam and press the seam allowances open.
- Set the sleeves into the armholes, matching the notches. Attach the shoulder pads and sleeve heads.
- Sew the lining pieces together, stitching the seams and darts, and leave an opening in the front seam of the right sleeve. Place the lining on the coat, right sides together, and stitch it to the inner edges of the Center Front Facings and the Back Neckline Facing. Stitch the lower corner of the front edge and trim the corners. Mark the hem of the coat and sleeves and press it to the wrong side. Stitch the lining to the coat hem and the sleeve hems. Turn the coat right side out through the opening in the sleeve and stitch the opening closed.
- On the right placket, make the buttonholes and sew on the matching buttons. On the left placket, make the first and third buttonholes and sew the matching inner buttons to the underlap.
- Fold the Waistband (tie belt) lengthwise in half, right sides together, and stitch around the edges, leaving an opening for turning. Trim the seam allowances at the corners and turn the belt right side out. Stitch the opening closed.