Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4383
#4385

Pattern

Pattern #4384

A fully lined women's coat, above the knee, with a stand collar whose right end crosses over and fastens with a button and a decorative loop, a hidden button placket on the front, welt pockets set into the front panel seams and two-piece sleeves with cuffs. Drafted to your own measurements. Recommended fabric: coating fabrics.

Tech. Description

Tailored Stand Collar Coat

A fully lined women's coat, above the knee, with a stand collar whose right end crosses over and fastens with a button and a decorative loop, a hidden button placket on the front, welt pockets set into the front panel seams and two-piece sleeves with cuffs.

When To Wear

  • Autumn and early spring, over dresses, trousers and knitwear.
  • For city and office wear with a scarf tucked under the collar.

Key Design Features

Silhouette: Straight, shaped by vertical panel seams at the front and back.

Length: Mid-thigh to just above the knee.

Collar: Two-piece stand collar (outer and inner), interfaced; the right end extends across the front, with a ready-made decorative loop caught in the seam.

Closure: Hidden button placket in the right front facing: a framed opening made with two interfaced placket linings, buttonholes worked through the facing, bar tacks between each pair of buttonholes, and topstitching on the right front that holds the placket. 6 buttons in total.

Front: Each front made of a centre front, a front inset and a side front, joined by curved panel seams; centre fronts and insets interfaced.

Pockets: In-seam pockets in the front panel seams with off-set welts, topstitched 0.7 cm from the edge and stitched down at the sides onto the side front; pocket bags of lining.

Sleeves: Two-piece set-in sleeves with front and elbow seams; a folded cuff at the wrist; shoulder pads and sleeve heads.

Back: Centre back seam, back insets and side backs with curved panel seams; back neckline facing.

Lining: Full lining, attached to the facings and back neck facing, bagged out through an opening in the right sleeve lining; sleeve lining stitched to the inner cuff.

Level Of Difficulty

Advanced. A framed hidden button placket with bar tacks, welt pockets in panel seams, a stand collar with an extended end stitched in one seam with the front edges, and a bagged lining.

Fabric Recommendations

Coating fabrics.

Additional Supplies

  • Lining fabric
  • Fusible interfacing (centre fronts, front insets, stand collar, front facings, welts, cuffs, back neckline facing, placket lining)
  • 6 buttons
  • Ready-made decorative loop
  • Shoulder pads
  • Sleeve heads

Cutter's Must

From main fabric:

  • Center Back – 2 pieces
  • Side Back – 2 pieces
  • Back Inset – 2 pieces
  • Side Front – 2 pieces
  • Front Inset – 2 pieces
  • Center Front – 2 pieces
  • Upper Sleeve – 2 pieces
  • Lower Sleeve – 2 pieces
  • Stand Collar – 2 pieces
  • Center Front Facing – 2 pieces
  • Off-Set Welt – 2 pieces
  • Cuff – 2 pieces
  • Back Neckline Facing – 1 piece

From lining fabric:

  • Center Back – 2 pieces
  • Side Back – 2 pieces
  • Center Front – 2 pieces
  • Side Front – 2 pieces
  • Upper Sleeve – 2 pieces
  • Lower Sleeve – 2 pieces
  • Pocket Bag – 4 pieces
  • Hidden Button Placket Lining – 2 pieces

From fusible interfacing:

  • Center Front – 2 pieces
  • Front Inset – 2 pieces
  • Stand Collar – 1 piece
  • Center Front Facing – 2 pieces
  • Off-Set Welt – 2 pieces
  • Cuff – 2 pieces
  • Back Neckline Facing – 1 piece
  • Hidden Button Placket Lining – 1 piece

Sewing Instructions

  1. Fuse the corresponding pieces with fusible interfacing.
  2. Fold each Off-Set Welt right sides together and stitch along the side edges. Trim seam allowances at corners, turn right side out, and press. Topstitch 0.7 cm from the edge. Stitch a Pocket Bag to the welt.
  3. Stitch the Front Inset to the Side Front, press the allowances open. Place a Pocket Bag on the right side of the Side Front, and the Pocket Bag with the attached welt on the Center Front, right side down. Stitch the pocket bags to the pocket opening allowances. Turn the Side Front seam onto the pocket bag and understitch.
  4. Stitch the front style seams and the pocket bags. Clip the allowance at the beginning and end of the pocket opening, press the style seam allowances towards the centre, pressing the pocket. Topstitch the side edges of the welt to the Side Front.
  5. Stitch the center back seam, press seam allowances open. Stitch the Back Inset to the Side Back, press the allowances open. Stitch the back style seams, press seam allowances towards the center.
  6. Stitch the shoulder and side seams of the coat, press seam allowances open.
  7. Mark the hidden placket opening with three lines on the right side of the right Center Front Facing: the first line is parallel to the edge and 1.5 cm from the finished edge; the second and third lines define the length of the opening. Place the interfaced Hidden Button Placket Lining on the right side of the facing, right side down, pointing away from the front edge, aligning its cut edge with the marked line. Stitch 0.5 cm from the marked line along the opening up to the lines defining its length. Place the second Hidden Button Placket Lining flush with the stitching of the first lining and stitch 0.5 cm away. Check the correctness of the lining attachment from the wrong side (stitches should be parallel). Cut the opening. Make diagonal cuts 1-1.5 cm from each end of the opening. Turn the linings through the opening to the wrong side, forming a frame from the fused lining equal to the width between the stitches. Topstitch along the lining attachment seam. Press the second lining towards the inner edge of the facing and topstitch 0.1 cm from the lining attachment seam. Mark and make the buttonholes. The buttonholes are made through the facing together with the interfaced placket lining. Straighten and secure the ends of the opening from the wrong side with a double backstitch at the base of the corners. Stitch the edges of the placket linings together. Place bar tacks between each pair of buttonholes, the length of the bar tack is equal to the frame width. Press the facing.
  8. Stitch the Back Neckline Facing to the Center Front Facings, press seam allowances open.
  9. Stitch the outer Stand Collar to the coat neckline, and the inner Stand Collar to the neckline of the facings and Back Neckline Facing; clip the allowances at curves, press open. Place the facings on the garment right sides together and stitch the front edges and the collar in one seam, inserting the decorative loop into the right end of the collar. Trim seam allowances at corners, turn the garment right side out, and press.
  10. Stitch the front seam of the Upper and Lower Sleeve, press seam allowances open.
  11. Press the cuff in half lengthwise, right side out. Unfold the cuff and attach the outer side to the lower sleeve edge, press seam allowances onto the cuff. Stitch the elbow seam of the sleeve, simultaneously stitching the cuff.
  12. Set the sleeves into the armholes according to the notches. Insert shoulder pads and sleeve heads.
  13. On the lining pieces, stitch the seams, leaving an opening in the front right sleeve seam. Place the lining right sides together with the coat and attach it to the inner edges of the front facings and the back neckline facing. Press the collar stand attachment seam allowances open and secure them close to the seams. Stitch the lower corner of the front edge, trim the corners. Mark and press the hem of the garment to the wrong side. Finish the hem of the garment with the lining. Stitch the lining sleeves to the inner half of the cuff. Turn the coat through the opening in the sleeve and stitch the opening closed.
  14. Topstitch the right front to secure the hidden button placket.
  15. Sew on the buttons to match the buttonholes.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?