Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4384
#4386

Oversized Full-Zip Dolman Hoodie

Pattern #4385

A women's oversized hoodie in thick knit with dolman sleeves cut in one with the body, a full-length centre front zip, a two-piece hood and two single-welt pockets. Drafted to your own measurements. Recommended fabric: thick knit fabric of natural or blended fibres.

Tech. Description

Oversized Full-Zip Dolman Hoodie

A women's oversized hoodie in thick knit with dolman sleeves cut in one with the body, a full-length centre front zip, a two-piece hood and two single-welt pockets.

When To Wear

  • As a light outer layer in spring and autumn, over T-shirts and tops.
  • With jeans, joggers or leggings for everyday and weekend wear.

Key Design Features

Silhouette: Oversized and relaxed; the body blouses over the hem band, which sits at the hip.

Sleeves: Dolman sleeves cut in one with the front and back, wide at the armhole, eased into deep folded cuffs at the wrist.

Collar: Hood made of two pieces joined by a centre seam, with the front edge turned under twice by 1 cm and topstitched.

Closure: Zip along the full centre front, from the hem band to the neckline.

Pockets: Two slanted single-welt pockets on the fronts, with interfaced welts and lining-fabric pocket bags.

Back: One piece cut on the fold, with no centre back seam.

Finishing: Folded hem band, slightly stretched as it is attached; shoulder and side seams pressed towards the back.

Level Of Difficulty

Intermediate. Welt pockets cut into knit fabric, a zip set into a knit band, stretch seams on an overlocker or with a zigzag stitch.

Fabric Recommendations

Thick knit fabric of natural or blended fibres.

Additional Supplies

  • Zip (length marked on the front pattern piece)
  • Lining fabric for the pocket bags
  • Fusible interfacing (welts, pocket openings)

Cutter's Must

From main fabric:

  • Back – 1 piece on fold
  • Front – 2 pieces
  • Cuff – 2 pieces
  • Hood – 2 pieces
  • Lower Placket (hem band) – 1 piece
  • Off-Set Welt – 2 pieces

From lining fabric:

  • Bigger Pocket Bag – 2 pieces
  • Smaller Pocket Bag – 2 pieces

From fusible interfacing:

  • Off-Set Welt – 2 pieces
  • Strips for the pocket openings – 2 pieces

Sewing Instructions

Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch the pieces directly on a 3- or 4-thread overlocker.

  1. Fuse the Off-Set Welts with fusible interfacing. Mark the pocket placement on the Fronts. Fuse the pocket opening area. Press each welt in half lengthwise, wrong sides together. Stitch the Smaller Pocket Bag to the inner side of the welt. Stitch the welt to the Front along the lower pocket marking line. Stitch the Bigger Pocket Bag to the Front along the upper pocket marking line. End both rows of stitching at the short marking lines. Cut the pocket opening; 1–1.5 cm before each end of the pocket cut diagonally into the corners. Turn the welt and the Bigger Pocket Bag to the wrong side through the opening. Secure the pocket ends from the wrong side with a double row of stitching across the base of the triangles. Stitch the pocket bags together and overlock their edges.
  2. Stitch the shoulder seams; stitch the side seams together with the underarm sleeve seams in one pass. Press the seam allowances towards the back and overlock.
  3. Stitch the Cuff into a ring. Fold the Cuff in half lengthwise, right side out, and press. Stitch the Cuff to the sleeve, easing the sleeve.
  4. Stitch the Hood pieces together along the centre seam, overlock the seam allowances. Fold the face edge of the hood inwards twice by 1 cm and topstitch. Set the Hood into the neckline of the hoodie, overlock the seam allowances.
  5. Overlock the front edges. Overlock one long edge of the Lower Placket (hem band). Stitch the unoverlocked edge of the band to the lower edge of the hoodie, slightly stretching the band. Insert the zip along the front edges. Wrap the band around the ends of the zip and stitch in the zip seam. Turn the band to the inside and stitch in the ditch of the band seam.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?