Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4385
#4387

Sheath Dress with Diagonal Buckle and Slit

Pattern #4386

A women's knee-length sheath dress in low-stretch knit with an asymmetric front: pleats gathered towards a side-front seam, a tab with a buckle at the waist and a slit below it. Elbow-length set-in sleeves and a zip at the centre back. Drafted to your own measurements. Recommended fabric: low-stretch knit of natural or blended fibres.

Tech. Description

Sheath Dress with Diagonal Buckle and Slit

A women's knee-length sheath dress in low-stretch knit with an asymmetric front: pleats gathered towards a side-front seam, a tab with a buckle at the waist and a slit below it. Elbow-length set-in sleeves and a zip at the centre back.

When To Wear

  • At the office and business meetings, with court shoes and a jacket.
  • For daytime events and dinners in autumn, winter and spring.

Key Design Features

Silhouette: Fitted sheath, slightly narrowing towards the hem.

Length: Knee length.

Neckline: Round neckline with an interfaced facing, topstitched along its outer edge.

Sleeves: Set-in, elbow length, with a 2 cm topstitched hem.

Front: Cut in two parts: a centre front with darts and pleats turned towards the middle, and a narrow side front. The seam between them opens into a topstitched slit in the skirt.

Closure: Zip in the centre back seam.

Back: Centre back seam and princess seams on both back halves.

Waist: A shaped self-fabric tab is caught in the side seam, passed through a decorative buckle and stitched into the side front seam.

Finishing: Hems turned up 2 cm and topstitched with a twin needle or on a coverstitch machine.

Level Of Difficulty

Intermediate. An asymmetric front with pleats and a slit set into a seam, a zip in knit fabric, a neckline facing.

Fabric Recommendations

Low-stretch knit of natural or blended fibres.

Additional Supplies

  • Knit fusible interfacing (neckline facings)
  • Zip
  • Decorative buckle

Cutter's Must

From main fabric:

  • 1. Center Back – 2 pieces
  • 2. Side Back – 2 pieces
  • 3. Side Front – 1 piece
  • 4. Center Front – 1 piece
  • 5. Sleeve – 2 pieces
  • 6. Back Neckline Facing – 2 pieces
  • 7. Front Neckline Facing – 1 piece
  • 8. Strap (buckle tab) – 1 piece

From fusible interfacing:

  • 1. Back Neckline Facing – 2 pieces
  • 2. Front Neckline Facing – 1 piece

Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. When overlocking, trim the seam allowances to 0.8 cm. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch the pieces directly on a 3- or 4-thread overlocker.

Sewing Instructions

  1. Stitch the darts on the Center Front, press the dart fullness upwards. Fold and baste the pleats on the Center Front; the pleat folds are directed towards the centre.
  2. Stitch the Side Front to the Center Front down to the slit mark, clipping the seam allowance at the corner. Clip the seam allowances at the mark. Above the mark, press the seam allowances towards the centre and overlock. Below the mark, press them open, overlock and topstitch along the edges of the slit.
  3. Overlock the centre back edge of each Center Back piece separately. Stitch the centre back seam from the zip mark to the hem. Press the seam allowances open, including the zip opening. Insert the zip.
  4. Stitch the princess seams of the back (Center Back to Side Back), press the seam allowances towards the centre and overlock.
  5. Fold the Strap in half lengthwise, right sides together, and stitch along the long side and the shaped end. Turn the Strap right side out, straighten the edges and press.
  6. Stitch the shoulder seams, press the seam allowances towards the back and overlock. Stitch the side seams, inserting the Strap into the seam. Press the seam allowances towards the back and overlock.
  7. Stitch the shoulder seams of the Front Neckline Facing and Back Neckline Facings, press the seam allowances open. Overlock the outer edge. Place the facing on the dress right sides together and stitch the neckline edge. Clip the seam allowances on the curves, turn the facing to the wrong side, press and topstitch it to the dress along its outer edge. Attach the centre back edges of the facing to the zip tape.
  8. Stitch the sleeve seams. Press the seam allowances and overlock.
  9. Set the Sleeves into the armholes, matching the notches. Press the seam allowances and overlock.
  10. Overlock the lower edge of the dress and the lower edges of the Sleeves. Fold to the wrong side, press and topstitch.
  11. Thread the Strap through the buckle and stitch its end into the seam joining the Side Front.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?