Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4386
#4388

Asymmetric Front Paneled Pencil Skirt

Pattern #4387

A women's knee-length pencil skirt with a front cut in three parts joined by curved diagonal seams, a shaped contrast tab caught in the side seam and fastened with one button, and a centre back vent. Drafted to your own measurements. Recommended fabric: suiting fabric of natural or blended fibres; for the shaped tab, a contrast fabric in a similar colour.

Tech. Description

Asymmetric Front Paneled Pencil Skirt

A women's knee-length pencil skirt with a front cut in three parts joined by curved diagonal seams, a shaped contrast tab caught in the side seam and fastened with one button, and a centre back vent.

When To Wear

  • At the office, with blouses, fitted knitwear and jackets.
  • As part of a suit in autumn, winter and spring.

Key Design Features

Silhouette: Narrow pencil skirt, slightly tapered towards the hem.

Length: Knee length.

Front: Upper, middle and lower sections joined by curved seams that run diagonally across the front, seam allowances pressed upwards.

Waist: No waistband: the top edge is finished with an outer facing band sewn on as part of the skirt and an inner facing, understitched 0.2 cm from the seam.

Closure: Invisible zip in the centre back seam.

Back: Two back halves with darts, a centre back seam and a vent.

Finishing: A shaped double-layer tab in a contrast fabric is caught in the side seam, passed through a self-fabric loop at the front facing seam and held with one button. Hem allowance 3 cm, sewn by hand with blind stitches.

Level Of Difficulty

Intermediate. Curved panel seams, an invisible zip, a back vent and a faced waist edge.

Fabric Recommendations

Suiting fabric of natural or blended fibres; for the shaped tab, a contrast fabric in a similar colour.

Additional Supplies

  • Fusible interfacing (facings)
  • Invisible zip
  • 1 button

Cutter's Must

  • Back facing – 4 pieces
  • Back skirt half – 2 pieces
  • Front facing - 2 pieces
  • Upper of front skirt half - 1 piece
  • Middle of front skirt half - 1 piece
  • Lower of front skirt half - 1 piece
  • Trim strip – 1 piece
  • Shaped waistband - 2 pieces
  • Back facing – 2 pieces
  • Front facing - 1 piece

Sewing Instructions

  1. Fuse interfacing to the pieces.
  2. Stitch darts on the back skirt halves. Press seam allowances towards the center. Attach outer back facings to the back skirt halves, press seam allowances upwards.
  3. Overlock the center edges of the back skirt half separately on each piece, simultaneously overlocking the vent. Stitch the center edge from the zipper mark to the edge of the vent. Press seam allowances open, pressing the slit for the fastener, press vent seam allowances towards the left side edge. Press the right side of the vent by 1 cm. Secure vent seam allowances with machine stitching. Insert the zipper.
  4. Overlock one longitudinal edge of the trim strip. Fold the unoverlocked edge inwards and press. Close the unoverlocked edge with the overlocked one and make two parallel stitches, securing the seam allowance.
  5. Attach the upper front to the middle, press seam allowances upwards and overlock. Attach the middle front to the lower, press seam allowances upwards and overlock. Attach the outer front facing to the front skirt half, inserting the trim strip, press seam allowances upwards.
  6. Fold the shaped waistband pieces right sides together and stitch along the outer edge. Clip seam allowances at curves, trim at corners, turn the piece right side out, straighten, and press.
  7. Stitch side edges, inserting the shaped waistband, press seam allowances towards the back and overlock.
  8. Stitch side edges of inner facings. Overlock the lower edge. Fold the facing with the skirt right sides together and stitch the upper edge. Topstitch seam allowances onto the inner facing at a distance of 0.2 cm from the stitching seam. Fold facings to the wrong side, press. Fold the center edges of the inner facing and sew to the zipper tape. Topstitch the inner facing into the seam of attaching the outer facing.
  9. Overlock the lower edge of the garment, press to the wrong side and hem with blind stitches.
  10. Fold the raw edge of the trim strip inwards and topstitch onto the facing. Sew on a button, securing the shaped waistband to the skirt.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Additional options

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?