Belted Stand Collar Puff Sleeve Dress
A women's dress with a fitted bodice and a flared skirt joined at the waist, a stand collar, a concealed five-button placket on the bodice and elbow-length sleeves with pleats at the shoulder and band cuffs. Worn with a separate tie belt.
When To Wear
- In spring and summer for work and daytime outings.
- With a cardigan or light jacket in cooler weather.
Key Design Features
Silhouette: Fitted bodice, flared skirt with a waist seam.
Length: Below the knee.
Collar: Stand collar with rounded corners, interfaced, set between the dress and the front facings.
Closure: Concealed placket on the right front with buttonholes on the inner layer; 5 buttons sewn on the left front. The opening runs from the neck to the waist seam.
Front: Upper front cut in centre and side parts joined by princess seams, with a separate yoke at the shoulder.
Sleeves: Elbow-length sleeves with pleats at the top, sewn to the back and to the front yoke; sleeve and side seams stitched in one. Finished with a band cuff folded in half.
Back: Upper back with small pleats, joined to a one-piece lower back at the waist.
Waist: Separate self-fabric belt, tied at the front.
Finishing: Seams overlocked; hem pressed up and topstitched.
Level Of Difficulty
Intermediate. A concealed placket, a stand collar set between dress and facings, a sleeve joined to a front yoke with a clipped corner, and pleats on sleeves and back.
Fabric Recommendations
Dress fabrics of natural or blended fibres.
Additional Supplies
- Fusible interfacing (collar stand, facings)
- 5 buttons
Cutter's Must
From main fabric:
- Back upper – 1 piece
- Back lower – 1 piece
- Front central upper right — 1 piece
- Front central upper left — 1 piece
- Front side upper — 2 pieces
- Front lower — 1 piece
- Yoke — 1 piece
- Sleeve — 2 pieces
- Stand — 2 pieces
- Left facing — 1 piece
- Cuff — 2 pieces
- Belt — 1 piece
From fusible interfacing:
- Stand — 1 piece
- Facing — 2 pieces
Sewing Instructions
- Fuse fusible interfacing to the designated pieces.
- Right front: Fold the front piece right sides together, aligning the "edge of the placket" and "edge of the concealed placket" lines. Fold the inner of the placket towards the main piece along the "edge of the placket" line and stitch the neckline edge from the placket edge to the notch. Clip the neckline seam allowance at the notch, turn the facing to the wrong side, and press. Make buttonholes on the inner placket. Left front: Fold the facing with the front right sides together and stitch the placket edge and neckline from the placket edge to the notch. Clip the neckline seam allowance at the notch, turn the facing to the wrong side, and press.
- Stitch the front princess seams, press seam allowances towards the center, and overlock.
- Attach the yoke to the upper of the front, press seam allowances towards the yoke, and overlock.
- Form and secure the pleats on the sleeve pieces. Attach the sleeve to the upper of the back, press seam allowances towards the sleeve, and overlock.
- Form and secure the pleats on the upper of the back. Attach the back with the sleeve to the front and yoke, clipping the front at the corner. Clip seam allowances on curves, press, and overlock.
- Fold the stand pieces right sides together and stitch along the outer edge. Clip seam allowances on curves, trim corners. Turn the stand to the right side, shape, and press.
- Fold the facings to the right side, insert the stand between the main fabric and the facings, and stitch from the notch to the shoulder seam. At the shoulder seams, clip the inner stand edge and stitch only the outer stand into the neckline. Then, from the shoulder seam to the notch, stitch together with the facing again. Clip seam allowances on curves, turn facings to the wrong side. Fold under the seam allowance of the inner stand and topstitch into the stitching line.
- Overlap the right front over the left front, aligning the center lines, and secure them together. Stitch the upper of the front to the lower, press seam allowances downwards, and overlock. Stitch the upper of the back to the lower, press seam allowances upwards, and overlock.
- Stitch the lower edge of the sleeve simultaneously with the side seams, press seam allowances, and overlock.
- Stitch the cuff into a loop, press seam allowances open. Press the cuff in half lengthwise with the right side out. Fold the cuff with the wrong side of the sleeve and stitch. Overlock seam allowances, turn the cuff to the right side.
- Overlock the bottom edge of the garment, press to the wrong side, and topstitch.
- Sew buttons onto the left front.
- Fold the belt in half lengthwise right sides together and stitch along the contour, leaving an opening for turning. Trim seam allowances at corners, turn the belt to the right side. Close the opening.