Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4380
#4382

Flared Skirt with Flap Pockets and Tie Belt

Pattern #4381

A women's flared skirt, below knee length, cut in two contrasting fabrics. Front hip pockets whose contrast lining folds out onto the skirt as a flap, a buttoned waistband with belt loops, a separate tie belt and a concealed zipper in the left side seam. Drafted to your own measurements. Recommended fabric: fine wool fabrics in two colours, of natural or blended fibres.

Tech. Description

Flared Skirt with Flap Pockets and Tie Belt

A women's flared skirt, below knee length, cut in two contrasting fabrics. Front hip pockets whose contrast lining folds out onto the skirt as a flap, a buttoned waistband with belt loops, a separate tie belt and a concealed zipper in the left side seam.

When To Wear

  • For the office and daytime in spring and autumn, with a tucked-in blouse or a fine knit top.
  • With a short jacket or cardigan over it; the tie belt marks the waist.

Key Design Features

Silhouette: Flared, widening from the waist to the hem, with soft folds all round.

Length: Below the knee.

Waist: Straight interfaced waistband in the contrast fabric, closed with one button and a buttonhole, with belt loops sewn into the waistband seam.

Closure: Concealed zipper in the left side seam.

Pockets: Front hip pockets with a side piece forming the pocket bag; the pocket lining is cut from the contrast fabric and interfaced in the flap area, and the flap is folded out onto the skirt front.

Skirt: Front and back each cut in one piece on the fold, with side seams only.

Back: Plain back with belt loops on the waistband.

Finishing: Separate decorative tie belt in the contrast fabric, threaded through the belt loops and tied at the front; hem overlocked, turned up 2 cm and topstitched.

Level Of Difficulty

Intermediate. Pockets with a fold-out flap, a concealed zipper, belt loops and a waistband finished by stitching in the ditch.

Fabric Recommendations

Fine wool fabrics in two colours, of natural or blended fibres. A double-faced fabric can be used instead.

Additional Supplies

  • Fusible interfacing (waistband, flap area of the pocket lining)
  • 1 button
  • 1 concealed zipper

Cutter's Must

From Main Fabric 1:

  • Front Skirt – 1 piece on the fold
  • Back Skirt – 1 piece on the fold
  • Side – 2 pieces

From Main Fabric 2 (contrast):

  • Skirt Waistband – 1 piece
  • Decorative Belt – 1 piece
  • Pocket Lining – 2 pieces
  • Belt Loops – 1 piece

From fusible interfacing:

  • Skirt Waistband – 1 piece; also the flap area of the Pocket Lining

Sewing Instructions

  1. Fuse interfacing to the Skirt Waistband. Fuse the Pocket Lining in the area of the decorative flap.
  2. Place the Pocket Lining on the Front Skirt, right sides together, and stitch along the straight (pocket opening) edges. Clip the allowance at the corner and turn the lining to the wrong side. Stitch the Side piece to the Pocket Lining along the pocket bag edge and overlock the allowance. Fold the decorative flap out onto the skirt. Matching the notches, baste the pocket lining to the side and upper edges.
  3. Stitch the right side seam. Overlock and press open the seam allowances.
  4. Stitch the left side seam from the notch for the zipper to the hem. Press open the seam allowances. Insert the zipper. Overlock one long edge of the Belt Loops strip. Fold the other long edge inwards and press. Fold the overlocked edge over it and stitch two parallel lines to secure. Cut the strip into belt loops of the required length.
  5. Attach the outer side of the waistband to the upper edge of the skirt, inserting the belt loops. Stitch the ends of the waistband, trim the seam allowances at the corners and turn out. Fold under the inner edge of the waistband and topstitch it in the ditch of the waistband seam. Press the waistband when finished.
  6. Overlock the lower edge of the skirt, press to the wrong side and topstitch.
  7. Fold the Decorative Belt in half lengthwise, right sides together, and stitch along the edges, leaving an opening for turning. Trim the seam allowances at the corners and turn to the right side. Sew the opening closed. Press the belt.
  8. Mark and make a buttonhole (on the waistband). Sew on the button.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Additional options

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?