Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4379
#4381

Asymmetric Draped Cap Sleeve Peplum Dress

Pattern #4380

A women's fitted dress with a waist seam, an asymmetric bodice draped by pleats from one shoulder, cut-on cap sleeves and a pleated double-layer peplum that opens at the centre front. Bodice lined. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres with added elastane.

Tech. Description

Draped Peplum Dress

A women's fitted dress with a waist seam, an asymmetric bodice draped by pleats from one shoulder, cut-on cap sleeves and a pleated double-layer peplum that opens at the centre front. Bodice lined.

When To Wear

  • To the office or business events, with a jacket in cooler weather.
  • As a guest at daytime celebrations and dinners.

Key Design Features

Silhouette: Fitted bodice joined at the waist to a straight, fitted skirt.

Length: About knee length.

Neckline: Wide round neckline, finished with the bodice lining.

Sleeves: Short cap sleeves cut in one with the bodice; armholes finished with the lining.

Front: One-piece upper front with darts and soft pleats running from the left shoulder, their folds turned towards the armhole; one-piece lower front with darts.

Waist: Peplum of two flounces, each cut double and turned through, laid in pleats and sewn into the waist seam. The flounces leave a gap at the centre front and wrap round to the centre back seam.

Back: Upper and lower backs with darts, a centre back seam with a concealed zip and an interfaced vent at the hem.

Lining: Bodice only: the lining faces the neckline and armholes, is sewn by hand to the zip tape and stitched into the waist seam.

Finishing: Hem pressed up and sewn by hand with blind stitches.

Level Of Difficulty

Intermediate. Asymmetric pleated bodice, a pleated peplum set into the waist seam, a lined bodice with armholes faced in two steps, a concealed zip and a back vent.

Fabric Recommendations

Dress fabrics of natural or blended fibres with added elastane.

Additional Supplies

  • Lining fabric
  • Concealed zip
  • Fusible interfacing (vent)

Cutter's Must

From main fabric:

  • Back upper - 2 pieces
  • Back lower - 2 pieces
  • Front upper – 1 piece
  • Front lower - 1 piece
  • Flounce — 4 pieces

From lining fabric:

  • Front lining — 1 piece
  • Back upper — 2 pieces

Sewing Instructions

  1. Stitch darts on back pieces. Press darts towards the center back seam.
  2. On both lower back pieces, apply fusible interfacing to the vent from the wrong side. On the right side, mark the center back seam line (vent fold line). Overlock the center back edge of each piece separately, overlocking the vent simultaneously. Stitch the center back edge from the mark to the edge of the vent. Clip the corner of the vent seam allowance on the right piece. Press the center seam allowances, pressing the vent. Press the right side of the vent 1 cm to the wrong side and topstitch. Press the vent allowances towards the left side and topstitch along the top with a machine stitch.
  3. Stitch darts on front pieces. Press depths towards the center. Form pleats on the upper front. Direct depths towards the armhole.
  4. Stitch shoulder seams. Press seam allowances open. Stitch side seams on upper and lower parts. Press seam allowances on lower dress parts open and overlock.
  5. Fold flounce pieces right sides together and stitch along the front and bottom sides. Trim seam allowances at corners, turn right side out, and press. Form flounce pleats as shown in the technical drawing and secure seam allowances along the upper edge.
  6. Stitch the upper and lower parts of the dress, inserting the flounces. Overlock the seam allowance and press upwards. Attach the back edges of the flounce to the back edges.
  7. Insert zipper into the center back seam.
  8. Stitch darts on back and front lining. Trim depths with an overlocker. Stitch shoulder and side seams of the lining. Press seam allowances open. Overlock the lower edge of the lining. Stitch the neckline with the lining. Turn the lining to the wrong side, clip seam allowances, and press. Stitch armholes in two steps: first the front armhole, then the back armhole. Clip seam allowances at curved areas and press. Hand stitch the lining to the zipper tape. Topstitch the lower edge of the lining into the seam joining the upper and lower parts of the dress.
  9. Overlock the hem allowance of the dress, press to the wrong side, and hand stitch with blind stitches.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?