Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4320
#4322

Jersey Top with Shoulder Yokes

Pattern #4321

A women's short-sleeved top for knit fabric, with a lined front yoke, a curved shoulder band that runs from the back neckline over the shoulders down to the front yoke, contrast piping along the band and a button at each band end. Drafted to your own measurements. Recommended fabric: medium-stretch knit fabric of natural or blended fibres, plus a companion knit in a contrasting colour.

Tech. Description

Jersey Top with Shoulder Yokes

A women's short-sleeved top for knit fabric, with a lined front yoke, a curved shoulder band that runs from the back neckline over the shoulders down to the front yoke, contrast piping along the band and a button at each band end.

When To Wear

  • In spring and summer with skirts, trousers or jeans.
  • On its own at the office or under an open jacket.

Key Design Features

Silhouette: Fitted top in hip length, shaped at the waist, with darts on the front below the yoke.

Neckline: Wide, shallow front neckline formed by the straight top edge of the yoke; round back neckline.

Front: One-piece front joined to a double-layer front yoke. Over the yoke lies a curved band, cut double, that frames the neckline and is held by a button sewn through the band and the yoke on each side.

Back: Double-layer back yoke cut on the fold, joined to a one-piece back with a horizontal seam at the shoulder blades.

Sleeves: Short set-in sleeves, sewn into an open armhole and closed together with the side seams.

Finishing: Decorative piping inserted into the curved edge of the band and the back neckline. Hems of the body and sleeves turned up and topstitched; a twin needle keeps the hem stretchy.

Level Of Difficulty

Intermediate. Sewing knit fabric, inserting piping into a curved faced edge, layering the band over the yoke and matching the yoke seams.

Fabric Recommendations

Medium-stretch knit fabric of natural or blended fibres, plus a companion knit in a contrasting colour.

Additional Supplies

  • 2 buttons
  • Decorative piping

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance for the garment bottom and sleeve hem – 1.5 cm, other seams 0.8 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. The approximate length of the decorative piping is marked on the Front pattern piece.

From main fabric:

  • Back – 1 piece
  • Front – 1 piece

From companion fabric (contrast colour):

  • Sleeve – 2 pieces
  • Back Yoke – 2 pieces on fold
  • Front Yoke – 2 pieces
  • Front Trimming – 4 pieces

Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle to maintain elasticity. You can also stitch the pieces directly on a 3- or 4-thread overlocker.

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Stitch the darts on the Front. Trim the dart depths with the overlocker.
  2. Place the two Front Yoke pieces right sides together and stitch the upper edge. Clip the seam allowances and turn right side out. Baste the two layers together along the side and armhole edges. Stitch the Front Yoke to the Front. Overlock the seam allowances.
  3. Stitch the shoulder edges of the Back Yoke to the Front Trimming (the shoulder band), on the outer layer and on the inner layer. Place the outer and inner layers right sides together and stitch the curved edge of the Front Trimming and the back neckline, inserting the decorative piping into the seam. Clip the seam allowances and turn right side out.
  4. Baste the two Back Yoke layers together along the side and armhole edges. Stitch the Back Yoke to the Back. Overlock the seam allowance.
  5. Lay the Front Trimming onto the Front Yoke and baste between the long marks.
  6. Set the sleeves into the open armholes.
  7. Stitch the side seams, continuing into the sleeve seam in one pass. Overlock the seam allowances.
  8. Overlock the bottom edge of the garment and the sleeve hems. Fold the allowance to the wrong side, press, and topstitch.
  9. On each side, sew a button through the Front Trimming and the Front Yoke.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?