Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4321
#4323

Sleeveless Sheath Dress with Yoke and Collar

Pattern #4322

A women's sleeveless sheath dress above the knee, with princess seams front and back, a lined yoke carrying a flat rounded collar, a short centre front opening closed with a loop and button, and a back vent. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres.

Tech. Description

Sleeveless Sheath Dress with Yoke and Collar

A women's sleeveless sheath dress above the knee, with princess seams front and back, a lined yoke carrying a flat rounded collar, a short centre front opening closed with a loop and button, and a back vent.

When To Wear

  • At the office in spring and summer, or with a cardigan or jacket in cooler weather.
  • For daytime events and dinners.

Key Design Features

Silhouette: Close-fitting sheath shaped by princess seams on the front and back; length just above the knee.

Collar: Flat rounded collar, split at the centre front, sewn in between the outer and inner yoke. The upper collar is interfaced.

Front: Front yoke in two halves with a short opening at the centre front, closed with a thread or fabric loop and one button. Centre front panel and two side fronts below the yoke.

Back: Back yoke, centre back seam and princess seams; interfaced vent at the hem of the centre back seam.

Closure: Invisible zipper in the left side seam.

Sleeves: Sleeveless; armholes bound with a 4 cm bias strip folded in half, turned to the inside and topstitched.

Finishing: Yokes faced with a second yoke layer; princess seam allowances pressed towards the centre; hem turned up and topstitched.

Level Of Difficulty

Intermediate. Princess seams, a collar enclosed between two yoke layers, a centre back vent, bias-bound armholes and an invisible zipper.

Fabric Recommendations

Dress fabrics of natural or blended fibres.

Additional Supplies

  • 1 button
  • Invisible zipper
  • Fusible interfacing (upper collar, back vent)

Cutter's Must

  • Back Center – 2 pieces
  • Back Side – 2 pieces
  • Front Center — 1 piece
  • Front Side — 2 pieces
  • Front Yoke — 4 pieces
  • Back Yoke — 2 pieces
  • Collar – 2 pieces

Sewing Instructions

  1. Fuse the upper collar with fusible interfacing.
  2. Stitch the princess seams of the front and back. Overlock the seam allowances and press them towards the center.
  3. On both back pieces, fuse the vent from the wrong side. On the right side, mark the center seam line (the fold line of the vent). Overlock the center seam allowance simultaneously with the vent edge. Stitch the center seam of the back up to the vent corner. Clip the corner of the vent seam allowance. Press the center seam allowance and the vent to the left side. Press the right side of the vent 1 cm to the wrong side and topstitch. Topstitch the vent seam allowances along the top with a machine stitch.
  4. Fold the collar pieces right sides together and stitch around. Turn the collar to the right side and press.
  5. Process the loop. Stitch the shoulder seams of the outer and inner yokes. Press the seam allowances open. Fold the inner and outer yokes right sides together. Insert the collar between them. Stitch the yokes along the center edge and neckline, inserting the loop. Turn the yokes to the right side and press. Attach the yokes to the front and back. Overlock the seam allowances and press them downwards.
  6. Cut a bias binding 4 cm wide and a length equal to the armhole length + 3 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the trim strip with the armhole edge right sides together and stitch. Fold the trim strip to the wrong side, clip the seams, and topstitch along the fold to the main piece. Press the seam.
  7. Stitch the right side seam. Overlock the seam allowances and press them towards the back. Overlock the seam allowances of the left side seam and stitch the section under the armhole and from the mark to the bottom. Press the seam allowances open. Insert the zipper.
  8. Overlock the bottom of the dress, fold inwards, and topstitch.
  9. Sew on the button.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?