Fitted Dress with Overlapping Collar
A sleeveless, knee-length women's fitted dress with a layered collar: an under collar and a two-part upper collar whose right side overlaps the left. Darted front and back, a back slit and an invisible zip in the left side seam.
When To Wear
- To the office and business meetings, with a jacket or cardigan over it.
- For daytime and evening events in warm weather.
Key Design Features
Silhouette: Fitted, shaped by bust and waist darts on the front and waist darts on the back.
Length: Knee length.
Collar: Two collars topstitched to the neckline 0.5 cm from the edge: a rounded under collar, and an upper collar made of left and right parts joined at the centre, with the right part overlapping the left. Both are interfaced.
Closure: Invisible zip in the left side seam.
Back: Centre back seam with a slit at the hem.
Finishing: Neckline and armholes finished with an all-in-one interfaced facing; hem turned up 3 cm and hand-finished with blind stitches.
Level Of Difficulty
Intermediate. An all-in-one facing with armholes turned through, layered collars set under the facing, an invisible side zip and a back slit.
Fabric Recommendations
Soft dress fabrics in natural or blended fibres.
Additional Supplies
- Fusible interfacing
- Invisible zip
Cutter's Must
From main fabric:
- Back – 2 pieces
- Front – 1 piece
- Left of collar – 2 pieces
- Right of collar – 2 pieces
- Lower of collar – 2 pieces
- Back facing - 1 piece
- Front facing - 1 piece
From fusible interfacing:
- Left of collar – 1 piece
- Right of collar – 1 piece
- Lower of collar – 1 piece
- Back facing - 1 piece
- Front facing - 1 piece
Sewing Instructions
- Fuse fusible interfacing to the pattern pieces.
- Stitch darts on the back pieces. Press darts towards the center edge.
- Serge the center edges of the back separately. Stitch the center seam of the back from the top to the slit notch. Press seam allowances open, pressing the slit.
- Stitch darts on the front piece, press waist dart depths towards the center, bust darts upwards.
- Stitch the shoulder seam allowances of the dress, press seam allowances towards the back and serge.
- Fold the lower collar pieces right sides together and stitch along the outer edge. Clip seam allowances at curves, turn the piece right side out, and press.
- Stitch the right collar to the left along the center seam, press seam allowances open. Fold the collar pieces right side together and stitch the outer edge. Clip seam allowances at curves, turn the piece right side out, and press.
- Topstitch the lower collar onto the neckline 0.5 cm from the edge. Topstitch the main collar onto the neckline 0.5 cm from the edge, overlapping the right side over the left (refer to the technical drawing).
- Stitch the shoulder and right side seam allowances of the facings. Press seam allowances open. Serge the left side and outer edge of the facing. Place the dress and facing right sides together and stitch the neckline. Clip seam allowances at curves and corners, turn the facing out, straighten, and press. Stitch the armhole in two steps: first the back, then the front. Clip seam allowances at curves, turn out, and press. Fold back the collars and stitch a securing seam through all layers along the neckline 0.5 from the seam.
- Turn the armhole facings to lie flat with the side edge. Serge the left side edges and facing edges separately, stitch them from the facing edge to the first notch and from the second notch to the bottom. Press seam allowances open, pressing the slit. Insert the zipper. Stitch the right side edge, press seam allowances towards the back and serge. Secure the facing to the garment at the right side and center seam allowances. Attach the facing to the zipper tape.
- Serge the bottom edge of the dress, press to the wrong side, and hem with blind stitches.