Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4318
#4320

Wrap Top with Buttons and Hem Band

Pattern #4319

A women's long-sleeved top in knit fabric with a two-layer front: the outer front crosses over with folds and is buttoned along its curved edge to the inner front. A double hem band finishes the lower edge. Drafted to your own measurements. Recommended fabric: dense, soft, well-draping knit with medium stretch, in natural or blended fibres.

Tech. Description

Wrap Top with Buttons and Hem Band

A women's long-sleeved top in knit fabric with a two-layer front: the outer front crosses over with folds and is buttoned along its curved edge to the inner front. A double hem band finishes the lower edge.

When To Wear

  • In autumn and winter with trousers, jeans or a straight skirt.
  • To the office under an open jacket.

Key Design Features

Silhouette: Close-fitting, cut for medium-stretch knit; hip length ending in a band.

Neckline: V-shaped neckline formed by the folds of the outer front; back and front necklines turned in and topstitched.

Front: Inner front with darts; outer front with a curved edge, turned in and topstitched, and a free left shoulder edge. The folds form when the button marks of the outer and inner fronts are matched; ten buttons sit along the curved edge.

Sleeves: Long set-in sleeves, set into the open armhole and sewn together with the side seam.

Back: Centre back seam.

Finishing: Hem band sewn into a ring, folded in half lengthwise and attached to the lower edge; sleeve hems turned up and topstitched, preferably with a twin needle.

Level Of Difficulty

Intermediate. Layering two fronts with a free shoulder edge, sewing knit fabric with stretch stitches or an overlocker, and a folded hem band.

Fabric Recommendations

Dense, soft, well-draping knit with medium stretch, in natural or blended fibres.

Additional Supplies

  • 10 buttons

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Sleeve hem, necklines, the free shoulder edge and the curved edge of the Outer Front – 1.5 cm, other seams 0.8 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. Note! Markings on the patterns are on the right side.

  • Back – 2 pieces
  • Outer Front – 1 piece
  • Inner Front – 1 piece
  • Sleeve – 2 pieces
  • Lower Part (hem band) – 1 piece

Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle to maintain elasticity. You can also stitch the pieces directly on a 3- or 4-thread overlocker.

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Stitch the darts on the Inner Front. Trim the dart depths with the overlocker.
  2. Stitch the centre back seam of the Back pieces. Overlock the seam allowances.
  3. Overlock the back neckline. Fold the allowance to the inside and topstitch. Finish the necklines of the Outer Front and Inner Front in the same way.
  4. Overlock the curved edge of the Outer Front. Fold the allowance to the inside and topstitch. Overlock the left shoulder edge of the Outer Front. Fold the allowance to the inside and topstitch.
  5. Lay the Outer Front over the Inner Front and baste them together along the right side edge, the right shoulder edge and the lower edge. Place the fronts and the Back right sides together and stitch the shoulder seams, folding the free left shoulder edge of the Outer Front out of the way. Overlock the seam allowances and press towards the back. Set the sleeves into the open armholes.
  6. Stitch the side seams, continuing into the sleeve seam in one pass. Overlock the seam allowances.
  7. Stitch the Lower Part into a ring. Fold it in half lengthwise, wrong sides together, and stitch it to the lower edge of the top. Overlock the seam allowance.
  8. Match the button marks on the Outer Front and Inner Front and sew on the buttons.
  9. Overlock the sleeve hems. Fold the allowance to the wrong side, press, and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?