Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#2826
#2828

Belted V-Neck Blouse with Gathered Sleeves

Pattern #2827

A women's loose-fitting pull-on blouse with a V-neck, a back yoke and short sleeves gathered at the cap. It is meant to be worn with a belt at the waist, which makes the hem flare out below it. Drafted to your own measurements. Recommended fabric: blouse fabrics from natural or blended fibres.

Tech. Description

Belted V-Neck Blouse with Gathered Sleeves

A women's loose-fitting pull-on blouse with a V-neck, a back yoke and short sleeves gathered at the cap. It is meant to be worn with a belt at the waist, which makes the hem flare out below it.

When To Wear

  • In summer with a narrow belt over trousers, shorts or a pencil skirt.
  • At the office under a jacket, belted at the waist.

Key Design Features

Silhouette: Loose and straight; the width is drawn in by a belt at the waist, so the part below the belt flares.

Length: To the high hip.

Neckline: V-neck at the front, round neck at the back, both finished with interfaced facings joined at the shoulders.

Sleeves: Short set-in sleeves, gathered between notches at the cap so they stand out from the shoulder; hems turned up and topstitched.

Front: One piece cut on the fold, with no seams or opening.

Back: Back yoke across the shoulders; the back below it is cut on the fold.

Waist: No waist seam; a separate belt is worn over the blouse.

Finishing: Seams overlocked, body hem turned up and topstitched.

Level Of Difficulty

Beginner. Few pieces and straight seams; the steps that need care are the neckline facings at the V point and gathering the sleeve caps evenly.

Fabric Recommendations

Blouse fabrics from natural or blended fibres.

Additional Supplies

  • Fusible interfacing (front and back neck facings)
  • Belt (not part of the pattern)

Cutter's Must

When stitching pieces, pay attention to the notches - they must match!

  • From main fabric:
    • Back - 1 piece on fold
    • Front - 1 piece on fold
    • Back Yoke – 1 piece
    • Sleeve – 2 pieces
    • Back Neckline Facing – 1 piece
    • Front Neckline Facing – 1 piece
  • From fusible interfacing:
    • Back Neckline Facing – 1 piece
    • Front Neckline Facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the designated pieces.
  2. Attach the yoke to the back, press seam allowances upwards and overlock.
  3. Stitch shoulder and side seams, press seam allowances towards the back and overlock.
  4. Stitch shoulder seams of the back and front neckline facings, press seam allowances open. Overlock the outer edge. Place facings right sides together with the garment and stitch the neckline edge of the back and front. Clip seam allowances at curves, turn facing to the wrong side, smooth out, and press. Secure to the garment at the shoulder seams.
  5. Overlock the sleeve hem allowance, fold to the wrong side and topstitch. Along the sleeve cap between the marks, stitch with a loosened upper thread and gather. Set sleeves into armholes, matching notches, press seam allowances and overlock.
  6. Overlock the blouse hem allowance, press to the wrong side and topstitch. The model is recommended to be worn with a belt.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?