Pattern

Fabric & Materials

Fabric recommendations: thin coat or suiting fabrics made from natural or blended fibers. YOU WILL ALSO NEED: fusible interfacing, decorative fastener.

CUTTER'S MUST

IF THE PATTERNS HAVE A DOUBLE CONTOUR, THEY INCLUDE SEAM ALLOWANCES. IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: all seams 1 cm. Hem allowance for the back lower edge and side front part – 2.5 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90cm to 150cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical pieces). WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

• From main fabric:
  • Back - 2 pieces
  • Side front part – 2 pieces
  • Center front part – 4 pieces
  • Cuff – 2 pieces
• From fusible interfacing:
  • Center front part – 2 pieces
  • Cuff – 2 pieces

Sewing Instructions

1. Fuse interfacing to the designated pieces.
2. Stitch the center back seam. Overcast the allowance and press it to the left side.
3. Stitch the upper sleeve seam. Overcast the allowances and press them towards the back.
4. Stitch the side seams simultaneously with the sleeve seams. Overcast the allowances and press them towards the back.
5. Overcast the hem allowance, fold it inwards, and topstitch (or hem with blind stitches).
6. Place the center front pieces right sides together and stitch the center collar seam. Press the allowance open. Place the center front pieces right sides together and face the front edge and lower edges. Clip the allowances, trim corners. Place the outer side of the center front onto the main garment and stitch along the front edge and neckline. Fold the allowance of the inner part inwards and topstitch into the attaching seam.
7. Stitch the cuff into a loop. Press the allowance open. Place the cuff right side onto the right side of the sleeve and stitch. Turn the cuff to the wrong side and press the seam. Fold the cuff allowance by 1 cm and topstitch onto the sleeve.
8. Attach the decorative fastener.