Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5999
#902231

Wrap Front V-Neck Long Sleeve Knit Top

Pattern #8004

A hip-length women's top for knit fabric with a crossover V-neck bodice: two upper fronts overlap and are joined to a lower front by a horizontal seam under the bust, with small pleats folded into that seam. Long set-in sleeves. Drafted to your own measurements. Recommended fabric: medium-stretch knit fabric of natural or blended fibres.

Tech. Description

Wrap Front V-Neck Long Sleeve Knit Top

A hip-length women's top for knit fabric with a crossover V-neck bodice: two upper fronts overlap and are joined to a lower front by a horizontal seam under the bust, with small pleats folded into that seam. Long set-in sleeves.

When To Wear

  • Everyday wear with jeans, trousers or skirts.
  • At the office under a jacket or cardigan.
  • Autumn, winter and spring, as a long-sleeved layer.

Key Design Features

Silhouette: Close-fitting, following the body to the hip.

Length: Hip length, straight hem.

Neckline: Deep V formed by the crossed upper fronts, the right one lapped over the left; the neck edges are serged, turned under and topstitched. The back neckline is finished the same way, with no facing or binding.

Front: Two upper fronts with pleats folded at the markings along the lower edge, basted together and stitched to a one-piece lower front under the bust.

Sleeves: Long, narrow, set-in, one-piece.

Back: One piece with no centre back seam or darts.

Finishing: Seams stitched with a stretch or narrow zigzag stitch and serged; hems of the body and sleeves turned up and topstitched with a twin needle.

Level Of Difficulty

Beginner. Few pieces, no fastenings and no facings; the only care points are folding the pleats at the markings, lapping the fronts evenly and stitching knit fabric without stretching the edges.

Fabric Recommendations

Medium-stretch knit fabric of natural or blended fibres.

Additional Supplies

  • Twin needle for the hems

Cutter's Must

  • From main fabric:
  • Back – 1 piece
  • Lower Front – 1 piece
  • Upper Front – 2 pieces
  • Sleeve – 2 pieces

Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.6 – 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity.

Sewing Instructions

  1. Serge the neckline edge of each Upper Front. Fold the allowance to the wrong side, press, and topstitch. Fold the pleats according to the markings.
  2. Lap the right Upper Front over the left one and baste them together. Stitch the Lower Front to the Upper Fronts, press and serge the seam allowances.
  3. Stitch the shoulder seams. Note: The shoulder seam of the back is 1 cm longer than the shoulder seam of the front (allowance for finishing the back neckline). Press the seam allowances towards the back.
  4. Stitch the side seams. Serge and press the seam allowances.
  5. Stitch the sleeve seams. Serge and press the seam allowances.
  6. Set the sleeves into the armholes, matching the notches. Serge and press the seam allowances.
  7. Serge the bottom edge of the garment, the bottom edge of the sleeve, and the back neckline edge. Fold the allowances to the wrong side, press, and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?