Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5246
#5248

Mini Wrap Robe

Pattern #5247

A women's short wrap robe with dropped shoulders, short wide sleeves and a contrast band running around the neckline and down both front edges. Closed with inner and outer ties and a separate belt held by loops. Drafted to your own measurements. Recommended fabric: light silk fabrics of natural or blended fibres; crepe-satin for the bands, belt, ties and loops.

Tech. Description

Mini Wrap Robe

A women's short wrap robe with dropped shoulders, short wide sleeves and a contrast band running around the neckline and down both front edges. Closed with inner and outer ties and a separate belt held by loops.

When To Wear

  • At home after a bath or shower, or while getting dressed.
  • As a light summer robe over sleepwear.

Key Design Features

Silhouette: Loose, straight cut with dropped shoulders.

Length: Short, ending at the upper thigh.

Collar: A wide band in crepe-satin, cut as a front-edge facing joined at the centre back, stitched along the front edges and neckline and turned to the right side, so it stands around the back neck and tapers into the front edges.

Sleeves: Short and wide, set into open armholes, sleeve and side seams stitched in one pass; hems finished with a crepe-satin band sewn in a ring.

Closure: Wrap front with two ties: one sewn to the left front edge, the other to the right side seam. A separate belt passes through three loops.

Back: One piece cut on the fold.

Finishing: Hem turned up twice and topstitched; belt edge-stitched 0.1 cm from the edge.

Level Of Difficulty

Beginner. Straight seams, sleeves set into open armholes, a band facing, turned ties, belt and loops.

Fabric Recommendations

Light silk fabrics of natural or blended fibres; crepe-satin for the bands, belt, ties and loops.

Additional Supplies

  • Crepe-satin for the front and sleeve bands, belt, ties and loops

Cutter's Must

From main fabric:

  • 1. Back – 1 piece on fold
  • 2. Front – 2 pieces
  • 4. Sleeve – 2 pieces

From crepe-satin:

  • 3. Waistband – 1 piece
  • 5. Center Front Facing – 2 pieces
  • 6. Sleeve Facing – 2 pieces
  • 7. Loop – 3 pieces
  • 8. Tie – 2 pieces

Sewing Instructions

  1. Stitch the shoulder seams. Press the seam allowances open. Set the Sleeves into the open armholes.
  2. Stitch the side seams and the sleeve seams in one continuous seam.
  3. Press the hem allowance to the wrong side, turn under and topstitch. Stitch the two Center Front Facing pieces together and press the seam open. Place the Center Front Facing on the robe, right sides together, and stitch along the front edges and the neckline 1 cm from the edge. Fold the facing along its fold line, right sides together, fold the long seam allowance outwards and stitch across the lower ends. Turn the facing right side out and, from the right side, stitch it in the ditch of the attaching seam, catching the inner layer.
  4. Stitch each Sleeve Facing into a ring and finish the sleeve hem in the same way as the front edge.
  5. Fold each Tie in half lengthwise, right sides together, and stitch along the long edge and one short end. Turn the Ties right side out, baste and press. Stitch one Tie to the left front edge and the other to the right side seam.
  6. Fold the Waistband in half lengthwise, right sides together, and stitch along the long edge and one short end, then turn it right side out and baste. Turn in the open end and topstitch the Waistband 0.1 cm from the edge.
  7. Fold each Loop in half lengthwise, wrong sides together, and press. Unfold the Loop, fold the raw edges in to the pressed line, fold it again along the line and topstitch. Stitch the Loops to the side seams.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?