Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5247
#5249

Silk Chemise with Contrast Satin Trim & Shaped Cup

Pattern #5248

A women's short slip chemise with darted bust cups lined in contrast satin, an A-line skirt from the underbust seam and thin satin straps that continue from the back facing. Drafted to your own measurements. Recommended fabric: silk fabrics of natural or blended fibres, such as crepe de chine; plain satin for the trim.

Tech. Description

Silk Chemise with Contrast Satin Trim & Shaped Cups

A women's short slip chemise with darted bust cups lined in contrast satin, an A-line skirt from the underbust seam and thin satin straps that continue from the back facing.

When To Wear

  • As a nightgown in summer.
  • As a slip under dresses and skirts.

Key Design Features

Silhouette: Fitted at the bust, flaring into an A-line from the underbust seam.

Length: Short, ending at the upper thigh.

Neckline: Deep V at the centre front where the two cups meet.

Front: Two separate cups, each shaped with a vertical dart, stitched to their satin linings along the upper and centre edges and turned, so the lining shows as a narrow contrast edge. The lower front is one piece cut on the fold.

Back: Upper back cut on the fold, joined to a lower back with a centre back seam; the joining seam is pressed upwards.

Straps: The satin straps are stitched to the back facing; the facing is wrapped around the upper back and armhole edges and its long edges are stitched together to form the straps. Strap length is set at the fitting.

Level Of Difficulty

Intermediate. Slippery silk, darted and lined cups with an even contrast edge, a facing that runs into narrow straps.

Fabric Recommendations

Silk fabrics of natural or blended fibres, such as crepe de chine; plain satin for the trim.

Additional Supplies

  • Plain satin for the cup linings, back facing and straps

Cutter's Must

From main fabric:

  • 1. Upper Back – 1 piece on fold
  • 2. Lower Back – 2 pieces
  • 3. Cup – 2 pieces
  • 5. Lower Front – 1 piece on fold

From trim fabric (satin):

  • 4. Cup Lining – 2 pieces
  • 6. Back Facing – 1 piece
  • 7. Strap – 2 pieces

Sewing Instructions

  1. Stitch the centre back seam of the Lower Back and stitch the Upper Back to the Lower Back. Press the seam allowances upwards.
  2. Stitch the darts on the Cups and Cup Linings. Place each Cup Lining on its Cup, right sides together, and stitch along the upper and centre edges. Turn right side out, baste so that the Cup Lining shows as a narrow edge on the right side, and press. Stitch the finished Cups to the Lower Front.
  3. Stitch the side seams.
  4. Stitch the Back Facing to the Straps. Place the Back Facing on the upper edge of the Upper Back and the armholes, right sides together, and stitch. Turn the facing to the wrong side, wrapping it around the edge, and turn under its open edge. Stitch from the right side in the ditch of the seam, continuing to stitch the long edges of the facing together to form the narrow straps.
  5. Try on the chemise, adjust the Straps to the required length, and secure them to the back.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?