Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5245
#5247

Wrap Front Pajama Romper with Ruffled Leg Openings

Pattern #5246

A women's one-piece pajama romper with a wrap-over V-neck bodice, contrast bands along the top edge, an elasticated waist casing and gathered ruffles along the high-cut leg openings. Wide fabric straps. Drafted to your own measurements. Recommended fabric: lightweight fabrics of natural and blended fibres, such as cotton batiste; batiste in a contrast colour for the facings, ruffles and straps.

Tech. Description

Wrap Front Pajama Romper with Ruffled Leg Openings

A women's one-piece pajama romper with a wrap-over V-neck bodice, contrast bands along the top edge, an elasticated waist casing and gathered ruffles along the high-cut leg openings. Wide fabric straps.

When To Wear

  • As summer sleepwear in light cotton batiste.
  • As loungewear at home on warm days.

Key Design Features

Silhouette: Bodysuit-style romper: a loose, bloused bodice over a fitted brief section, gathered at the waist.

Neckline: V-neck formed by the right front lapped over the left; the fronts are basted together at the lower edge.

Front: Each upper front is cut in two parts, a centre panel and a side panel, joined by a vertical seam. The lower front is one piece cut on the fold.

Back: Straight upper edge; upper and lower back each cut in one piece on the fold.

Straps: Folded and stitched contrast straps, sewn to the front corners and fixed at the back after fitting to adjust the length.

Waist: The brief section is joined to the bodice and the seam allowance is topstitched down to form a casing for elastic cut to the waist measurement.

Legs: High-cut leg openings, overlocked, topstitched and finished with elastic; gathered contrast ruffles set between markings.

Finishing: Contrast facings turned to the right side along the top edge and edge-stitched at 0.1 cm, forming a visible band; three small snaps.

Level Of Difficulty

Intermediate. A wrapped bodice, facings turned to the outside, gathered ruffles, elastic in the legs and a waist casing.

Fabric Recommendations

Lightweight fabrics of natural and blended fibres, such as cotton batiste; batiste in a contrast colour for the facings, ruffles and straps.

Additional Supplies

  • Contrast batiste for the facings, ruffles and straps
  • Elastic tape for the waist and leg openings
  • 3 small press-on snaps

Cutter's Must

From main fabric:

  • 1. Upper Back – 1 piece on fold
  • 2. Lower Back – 1 piece on fold
  • 3. Lower Front – 1 piece on fold
  • 4. Upper Middle Front – 2 pieces
  • 5. Upper Side Front – 2 pieces

From contrast fabric:

  • 6. Back Facing – 1 piece on fold
  • 7. Front Facing – 2 pieces
  • 8. Flounce – 2 pieces on fold
  • 9. Strap – 2 pieces on fold

Sewing Instructions

  1. Stitch each Upper Middle Front to an Upper Side Front. Stitch the side seams joining the upper fronts and the Upper Back. Stitch the side seams joining the Front Facings and the Back Facing.
  2. Place the right side of the facing against the wrong side of the upper edge of the bodice and stitch. Turn the facing to the right side of the garment, turn under its raw edge, and edge-stitch it down. Edge-stitch the upper edge at 0.1 cm.
  3. Lap the right front over the left front, matching the centre front lines, and baste the lower edges together.
  4. Stitch the side seams of the brief section (Lower Front and Lower Back). Press the straight edges of the Flounces to the wrong side, turn under, and topstitch. Gather the curved edges of the Flounces and baste them to the leg openings between the marks.
  5. Turn the cut-on facings of the Lower Front and Lower Back to the wrong side, turn under the raw edge, and press. Overlock the seam allowances of the leg openings, press them to the wrong side, and topstitch. Place elastic along the leg openings and, stretching it slightly, stitch it on with a zigzag stitch.
  6. Stitch the brief section to the bodice. Press the seam allowance downwards and topstitch it to form a casing. Thread elastic equal to the waist measurement through the casing.
  7. Fold each Strap in half lengthwise, right sides together, and stitch along the long edge. Turn the Straps right side out, press, and edge-stitch. Sew the Straps to the upper front corners. Try on the romper, adjust the Straps to the required length, and sew them to the back at the marks.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?